1.5KW Vortex High Pressure Blower Coulson Aluminum Industrial Vortex Fan Low Noise Industrial Air Pump

Description :

Three phase 380V vortex air pump 11KW fish pond oxygenation pump air suspension fan Colson high-pressure fan

　　Structural characteristics:

　　Lightweight design, compact structure

　　-Single level, double level, three level, four level, five level, IP54 protection level 2 motor, insulation level F, bearing equipped with Japanese NSK bearings. compact structure

　　-Aluminum alloy casting, lightweight, exquisite craftsmanship, and beautiful appearance.

　　Wide performance range

　　high reliability

　　-Casting aluminum alloy impeller and high-strength shell

　　-The structure is simple, with only 5 main components - base, housing, impeller, bearings, and motor

　　-Sealed bearings to prevent damage from pollutants

　　-Only one annular chamber unit to prevent thermal stress damage

　　-Double Chen type elastic shaft seal reduces leakage

　　-Adequate impeller support to prevent blade breakage and blower damage

　　-Single side sealing gap to reduce malfunctions during high-temperature operation of the blower

　　Oil free transportation

　　-No hydrocarbons carried out, no oil and gas supply air

　　-Meet hygiene and scientific application requirements

　　Low noise and low temperature rise

　　-Single vortex single-sided suction impeller design, with lower noise and lower temperature rise compared to the "paddle wheel" design

　　-Unique circular chamber design keeps the airflow in a stable laminar state with low airflow noise

　　-Aluminum alloy shell with good heat dissipation performance.

Vortex high-pressure fanIt has five characteristics: strong suction, high pressure, large air volume, no noise, and maintenance free. Beautiful appearance, balanced operation, easy to use, and the fan blades are made of high-strength aluminum alloy; It has dual functions of blowing and suction, and can be used for both suction and blowing. Compared to other fans, its pressure is much higher, whether it is dynamic pressure or negative pressure, it is often more than ten times that of ordinary fans!

Vortex high-pressure fanOperation and maintenance:

　　1. After installation, the air pump should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

　　2. When the air pump is running, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperatures, excessive motor currents, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

　　3. After using the air pump, the bearing grease should be replaced.

　　4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

　　During the shutdown period of the air pump, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan chamber and causing accidents.

　　6. The air pump needs to be inspected every six months to remove dust and oil stains from the fan flow channel.

Kind Reminder:

　　Dear customers and friends, in order to provide you with a better shopping experience, please contact our online customer service before placing an order to check if there is any stock available. [Offline sales channels] to avoid unnecessary trouble for you.

　　As the products sold in our store belong to heavy goods, transportation is carried by third-party cooperative logistics. Each shipment is insured with cargo insurance. To avoid damage to the goods during transportation, customers are requested to check the integrity of the outer packaging before receiving the goods. If there is any damage, please contact our customer service in a timely manner and refuse to accept the goods. We will then resend the goods.

　　Our store supports inappropriate return and exchange services. The requirement for return and exchange is that it cannot affect secondary sales. For serious issues such as use, damage, oil stains, etc., return and exchange services are not supported. The cost of return and exchange will be borne by the buyer.

　　Customers who need to issue additional tickets should inform customer service in advance of the remarks. The above quotation does not include tax, and the bulk purchase price is negotiable. Online orders require confirmation of receipt before invoicing can be issued. We kindly ask for the understanding and support of our customers and friends.

　　Regarding the new advertising law, Kelsen expressed support, and our store has made adjustments and improvements to the product content, gradually investigating and improving the true information. Our store hereby solemnly declares that all the wording and functional statements on our pages are invalid and will not be used as a reason for compensation. We hope that consumers can understand and also ask anti-counterfeiting personnel to show mercy.

　　Delivery gifts will be randomly distributed by our store and will not be redeemed. The final interpretation rights belong to our store

AfterSalesService :

• 1.5KW Vortex High Pressure Blower