Biological fermentation aeration blower

Description :

　　Biological fermentation aeration blower, organic fertilizer aeration blower, vacuum suction vortex high-pressure fan, wear-resistant low-noise blower

　　Biological aeration high-pressure fanFeatures:

　　1. Easy to install

　　Air ring vacuum pump is different from general vacuum pumps, and can be installed at any time in the place of use for compressed air or for evacuation. And it can be installed in any horizontal or vertical direction.

　　2. Sturdy structure

　　The body is made of ADC12 aluminum alloy casting, which is different from general iron shell or AC10 aluminum alloy blowers. ADC12 material is the same as Mercedes Benz car wheel drums, making it more sturdy and durable.

　　3. High reliability

　　Apart from the impeller, there are no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, making it highly reliable and almost maintenance free. No oil or gas, no pollution. When the impeller rotates, it does not come into contact with anything that is not visible, and lubrication is free, thus ensuring no oil or gas.

　　4. Low vibration

　　Organic fertilizer aeration blowerWorking principle:vortex blowerThe impeller is composed of dozens of blades, similar to the impeller of a large gas turbine. The air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller, where it enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating airflow generated by the rotation of the impeller leaves the air pump with extremely high energy for use. The fan adopts a dedicated explosion-proof motor, with a compact structure, small size, light weight, low noise, and no water or oil in the air source sent out.

　　Wear resistant low-noise blowerApplication;

　　1. Air suction function: screen printing machine suction, welding exhaust gas suction, weaving machine silk suction, photographic plate making, powder conveying, printing adsorption, industrial vacuum suction, vacuum dehydration, book making machine, residual cloth treatment, milk carton filling machine, tofu machinery, processing material retention, construction site, ironing machine, gas decomposition.

　　2. Hair blowing function: gas and heavy oil spraying, bottle washing machine drying, paper and cloth strip blowing, air knife for drying, cutting machine air cushion, livestock manure fermentation explosion gas, voucher conveying, electrolyte stirring, oxygen supply for breeding pool, convenient punching machine for taking formed products, powder particle conveying, incinerator waste discharge, smoke blowing and suction, car washing and drying, forced drying of printing machine, washing and drying.

　　Biological fermentation aeration blowerParameter selection

　　vortex blowerThe main parameters for selection are power, air volume and pressure (which require certain requirements for calculation), voltage, etc. If you need other accessories, you should communicate with the relevant supplier Shanghai Quanfeng Industrial Co., Ltd. Installation and use of vortex fan

　　1. The vortex fan should be placed in a relatively stable place, and the surrounding environment should be clean, dry, and well ventilated.

　　2. The rotation direction of the impeller of the vortex fan must be in the direction indicated by the arrow on the fan casing.

　　3. When the high-pressure vortex fan is working, the working pressure should not exceed 8kPa to avoid excessive heat generated by the fan and damage to the air pump caused by motor overcurrent.

　　4，vortex blowerExcept for the two bearings of the motor rotor, there is no direct contact friction in other parts. The installation method of bearings for this fan is mainly divided into two categories. *The bearing at the end of the class air pump is installed in the pump body between the motor base and the impeller, and this type of air pump does not need to be lubricated normally. The bearings on the second type of air pump end are installed in the middle of the pump cover, and the bearings on this type of air pump end should be regularly lubricated with grease (7018 high-speed grease). Once a month, for air pumps that work continuously in three shifts, the refueling frequency should be increased. The maintenance and upkeep of the bearings on the motor and fan end of this type of air pump shall be in accordance with the * type of air pump.

　　5，Jiangsu KelsenThe filter screens and silencing devices at both ends of the vortex air pump should be cleaned in a timely manner according to the situation to avoid blockage and affect use.

　　6，Vortex air pumpThe external connection of the inlet and outlet must be made using flexible hoses (such as rubber hoses, plastic spring hoses).

　　7. Replacement of bearings for vortex air pump: The replacement of bearings must be carried out by personnel familiar with repair work. First loosen the screws on the pump cover, and then disassemble the parts one by one according to the order shown in the diagram. The disassembled parts should be cleaned, and then assembled in reverse order. When disassembling, do not forcefully pry the impeller. Use a dedicated roller to remove it, and do not miss the adjusting gasket to avoid affecting the clearance that has been adjusted before leaving the factory.

　　8. It is strictly prohibited for solids, liquids, and corrosive gases to enter the pump body of the high-pressure vortex air pump.

AfterSalesService :

• Biological fermentation aeration blower