Grinding Machine Vacuum Cleaner Workshop Grinding Machine Vacuum Cleaner Dust Collection Vacuum Cleaner Industrial Grinding Machine Vacuum Cleaner

Description :

Grinding Machine Vacuum Cleaner Workshop Grinding Machine Vacuum Cleaner Dust Collection Vacuum Cleaner Industrial Grinding Machine Vacuum Cleaner

380V workshop ground dust collectorIn industrial production processes such as polishing, cutting, grinding, crushing, and incineration (combustion), fine particles such as debris, smoke, or dust are generated. The process of separating these fine particles from the gas through dust removal equipment is called industrial dust removal.

Three phase electric industrial vacuum cleanerThe working principle is that the dust containing gas is sucked into the box by the fan through the suction pipe, and then enters the filter bag for filtration. The dust particles are blocked on the surface by the filter bag. The purified gas after filtration is discharged from the air outlet using a filter element purification method. The high-precision membrane filter material imported from Germany is used for purification. The consumable cost is low and does not need to be replaced frequently, saving environmental protection. It can be directly discharged indoors for recycling or discharged outdoors as needed. The main engine power part generally uses 380V power electricity as the power source, and the entire dust removal and filtration is the result of a comprehensive effect of gravity, inertia force, collision, electrostatic adsorption, screening and filtration. Based on the above characteristics of industrial vacuum cleaners, they are widely used in some fields. After the dust collector works continuously for a period of time, the dust on the surface of the filter bag continues to increase, and then the dust is cleaned. The dust is shaken off in the dust collector (drawer) and then manually processed. The filter element is made of polytetrafluoroethylene coated microporous material, which has the characteristics of waterproofing, oil resistance, and high temperature resistance,

　　The five characteristics of industrial vacuum cleaners;

　　1. The filter cleaning method includes five types of filter cleaning systems: manual dust shaking, electronic paddle dust shaking, air flow back blowing, pulse back blowing, and electromagnetic back blowing. The use of manual dust shaking is cost-effective for working conditions with relatively less dust. For working conditions with high dust, use air flow back blowing or pulse back blowing to shake the dust, and clean it thoroughly without damaging the filter element. The equipment supporting area can absorb debris, particles, dust, and other impurities by using electronic paddles to vibrate the dust, which can automatically clean the filter without stopping the machine and improve work efficiency.

　　2. The material and characteristics of the dust collection bucket are that the metal dust collection bucket is made of cold-rolled steel plate and extruded through a mold. The bucket wall is smooth and does not adhere to other dust and debris, making it easy to clean. The design of the bucket wall with concave convex reinforcement ribs can improve the service life and compressive strength of the dust collection bucket. The top of the upper barrel is equipped with a metal buckle to lock the lid tightly, preventing poor sealing and air leakage that may affect use. The separation bucket has a stainless steel thickened mobile push handle, and the bottom of the separation bucket is equipped with rubber universal moving wheels, making it more convenient and efficient to dump garbage.

　　3. The noise reduction design of the filtration system adopts metal cyclone separation technology to separate the inhaled garbage from the high-efficiency filter, effectively preventing sharp substances and other metal debris from damaging the high-efficiency filter element. The high-efficiency filtration system is made of imported Dongli laminated material. The filter cartridge design can increase the filtration area, and the surface coating makes the filter surface smoother and less prone to dust adhesion, improving work efficiency. The dust particles with a filtration accuracy of 0.28UM ensure that the discharged air is cleaner and more environmentally friendly. The exhaust outlet is equipped with a metal stainless steel muffler, which can reduce the noise during work and provide you with a quiet and comfortable working environment.

　　4. The fully automatic pressure relief system is designed with an aluminum alloy pressure relief valve on the top of the dust collection bucket. When the pipeline sucks in large particles of debris, blockage causes the suction force to decrease or there is no suction force, the pressure relief valve will automatically sense whether the negative pressure inside the dust collection bucket is normal. If the negative pressure inside the dust collection bucket increases, it will automatically open the pressure relief valve to effectively ensure the normal operation of the main engine, reduce the resistance of the vacuum suction fan, and improve the machine's service life.

　　5. The vacuum pressure sensing design machine is equipped with a vacuum negative pressure gauge on the side, which can detect in real time whether the negative pressure inside the dust collection bucket is within the factory set negative pressure range. If the pressure value exceeds the set range, it will automatically send a signal to the vacuum cleaner to stop the operation of the main machine and protect the fan.

　　Working principle of high-pressure and powerful vacuum cleaner

　　The fan impeller of the dust collector is driven by the high-speed motor, and the blades in the impeller continuously do work on the air, allowing the air in the impeller to receive energy and be discharged from the fan at a very high speed. At the same time, the air in the suction section at the front end of the fan continuously supplements the air in the impeller, resulting in an instantaneous vacuum inside the suction section, that is, a relatively high negative pressure difference is formed between the suction section and the external atmospheric pressure. Under the action of this negative pressure difference, the garbage and dust near the suction nozzle enter the vacuum cleaner with the airflow, pass through the filter inside the vacuum cleaner, and remain in the ash storage box. The air is filtered and then discharged from the vacuum cleaner into the room, completing the entire vacuuming process.

Maintenance of dust collection vacuum cleaner:

　　1、 Regularly check whether the plug and power cord are damaged. If they are damaged, they need to be maintained or replaced in a timely manner.

　　2、 After using an industrial vacuum cleaner, it is important to promptly clean all suction accessories and debris in the dust bin. In addition, the dust barrier and bag should also be cleaned promptly after each use, and checked for any perforation or air leakage. Do not use damp dust barrier bags for dust removal work.

　　3、 We must keep industrial vacuum cleaners in a well ventilated and dry place after use.

　　4、 Before using an industrial vacuum cleaner, check the sealing of the housing and hoses to ensure reliable sealing and prevent air leakage.

　　5、 During the use of industrial vacuum cleaners, if the main unit heats up and emits a burnt smell, as well as abnormal vibration or noise, it must be repaired in a timely manner and cannot be forcibly used to avoid unnecessary trouble and losses.

　　6、 After using an industrial vacuum cleaner, it is important to check for any damage to the safety valve and any blockages or debris in the air inlet. If any debris is found, it should be cleaned up promptly.

　　Kind Reminder:

　　Dear customers and friends, in order to provide you with a better shopping experience, please contact our online customer service before placing an order to check if there is any stock available. [Offline sales channels] to avoid unnecessary trouble for you.

　　As the products sold in our store belong to heavy goods, transportation is carried by third-party cooperative logistics. Each shipment is insured with cargo insurance. To avoid damage to the goods during transportation, customers are requested to check the integrity of the outer packaging before receiving the goods. If there is any damage, please contact our customer service in a timely manner and refuse to accept the goods. We will then resend the goods.

　　Our store supports inappropriate return and exchange services. The requirement for return and exchange is that it cannot affect secondary sales. For serious issues such as use, damage, oil stains, etc., return and exchange services are not supported. The cost of return and exchange will be borne by the buyer.

　　Customers who need to issue additional tickets should inform customer service in advance of the remarks. The above quotation does not include tax, and the bulk purchase price is negotiable. Online orders require confirmation of receipt before invoicing can be issued. We kindly ask for the understanding and support of our customers and friends.

　　Regarding the new advertising law, Kelsen expressed support, and our store has made adjustments and improvements to the product content, gradually investigating and improving the true information. Our store hereby solemnly declares that all the wording and functional statements on our pages are invalid and will not be used as a reason for compensation. We hope that consumers can understand and also ask anti-counterfeiting personnel to show mercy.

　　Delivery gifts will be randomly distributed by our store and will not be redeemed. The final interpretation rights belong to our store.

　　Our service and business philosophy: Quality - is the weight of trust, the key to winning in competition, the endless pursuit, the starting point of value and dignity, adhering to the principle of quality *, providing satisfactory services, customer satisfaction is our eternal purpose, providing * services to make customers completely satisfied.

AfterSalesService :

• Grinding machine vacuum cleaner