Material fermentation aeration vortex fan

Description :

　　Performance characteristics of dedicated fans for material fermentation aeration

　　1. Ultra quiet type, no noise: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure fan is improved, thereby achieving a silent effect. 2. High reliability: When the usage situation changes, the machine can still operate safely. Apart from the impeller, the high-pressure blower has no other actions, so its high reliability is almost maintenance free. The precision outer bearing with good heat dissipation has the following advantages: high compression ratio; The operating temperature of the bearing is low; Long lifespan; No maintenance required. 3. Easy to install and fully equipped, can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.

　　Special fan configuration for material fermentation aeration

　　1. Shell material: The high-pressure fan adopts ultra strong die cast aluminum, which is the same aluminum material as the wheel rim. Compared with ordinary aluminum alloy, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans. 2. Motor performance: The high-voltage fan adopts a wide frequency and voltage motor, which is included in single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. The motor frequency can be adjusted from 45-75HZ, with an IP55 protection level and F-class insulation level. Its advantages are technology that domestic motors cannot achieve, and it is highly favored by customers at home and abroad; 3. Fan oil seal: The fan adopts an oil seal made of fluororubber, which can withstand temperatures ranging from -25 ℃ to 300 ℃. Compared to the general oil seal, its lip temperature is 20-50 ℃ higher than the working medium temperature during operation, making it more stable in performance, maintenance free, and has a longer lifespan; 4. Fan bearings: The core components of the fan are made of SKF branded bearings, which can withstand up to 180 degrees Celsius and a speed of one minute. For domestically produced Luo axis and Japanese bearings, the performance is stable, the noise is low, maintenance is free, and the service life is longer, which can ensure that the fan runs longer.

　　Working principle of dedicated fan for material fermentation aeration

　　The dedicated high-pressure blower for aeration equipment uses the high-speed operation of the fan impeller to generate strong suction and pressure, forming a local vacuum inside the dust collector. Under the action of suction and pressure, air is discharged at high speed, and the air in the suction part at the front end of the high-pressure blower continuously supplements the air in the fan, causing an instantaneous vacuum inside the vacuum cleaner and forming a negative pressure brush with the external atmospheric pressure. Long connecting pipes, hoses, bent pipes, and hose joints enter the dust filter bag, and dust and other debris are trapped in the dust filter bag. After being purified by the filter, the air at the tail of the organism is discharged from the air outlet! 3. High pressure fans use suction power in industrial vacuum cleaners to create air circulation and vacuum, collecting dust and other debris through pipes.

　　Functional advantages of dedicated fans for material fermentation aeration

　　The fan volume control has high stability and is easy to operate. Complete range of styles. Strong insulation performance, easy installation, high reliability, high compression ratio, low bearing operating temperature, oil-free and pollution-free, easy maintenance, beautiful appearance, high quality The generation of high pressure and high suction is due to the unique design of the impeller. The impeller edge of the vortex air pump has multiple blades. When the impeller rotates, due to centrifugal effect, the air in the two blades is quickly moved towards the outer edge direction, transferring energy. The wind pressure is quickly superimposed, forming high pressure or high force, and its speed is increased. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the transfer of energy by multiple blades, wind pressure is rapidly superimposed, resulting in high pressure or high suction.

　　Regardless of the brand of material fermentation aeration fan, two aspects of protection are required: pressure and dust. 1. For pressure, a pressure relief valve is often used, which is an unloading valve. When the operating pressure of the high-pressure fan exceeds the set pressure of the pressure relief valve, the pressure relief valve will automatically open to release the excess pressure and protect the high-pressure fan. 2. For dust, filters are often used. It often uses filter cartridges with different filtration accuracies according to different usage scenarios. Different filter cartridges have different maintenance methods and service lives, which need to be clarified when ordering.

　　Scope of use of dedicated fans for material fermentation aeration

　　Application of high-pressure blower for biological fermentation aeration of livestock and poultry manure: equipment for printed circuit boards (PCBs), cleaning equipment, canned beverage equipment, plastic peripheral equipment, adhesive label printing equipment, woodworking machinery, papermaking machinery, packaging machinery, food machinery, textile machinery, sewage treatment, aquaculture, kiln mining, combustion machines, dust collectors, incinerators, powder three-dimensional conveying, drying machines, glass industry, ice making industry, mechanical cooling, general air supply and other industries. Fans have been widely praised by customers for their stable product performance, safety and reliability, efficient service, and speed.

AfterSalesService :

• Material fermentation aeration vortex fan