Solving the problem of reagent filling and sealing, quantitative filling reagent aluminum foil film sealing machine, Wuhan Lvgong filling and sealing machine, reagent aluminum foil sealing machine

Description :

1. Customized packaging machine equipment configuration list:

　　2Customized packaging machine equipment structure according to demand

oneTherackpart:

　　1.1. The entire machine is welded with a 304 stainless steel square tube frame as a whole.

　　1.2. The motor box head frame plate is made of 30 thick A3 iron plates welded together and wrapped in stainless steel.

　　1.3. There are movable directional wheels and positioning devices in contact with the ground.

　　1.4. The whole machine frame is welded together as a whole.

　　2Mold section:

　　2.1. The template is designed according to the principle of one out of eight.

　　2.2. Process the template according to the sample provided by the buyer, and arrange the template according to the sample film provided by the buyer.

　　2.3. Adopting acid resistant and corrosion-resistant molds

3. Cup drop section:

　　3.1. Manually pour the cup into the vibrating tray.

　　3.2. The lower cover slide automatically divides and arranges.

　　3.3. After automatic neat sorting, the fixture is accurately placed into the main machine mold.

4. Automatic film release system:

　　4.1. Vacuum suction film is used, with a vacuum source provided by a vacuum pump, and a cylinder lifting suction and discharge film is used.

　　4.2. Adopt high-density acid resistant aluminum alloy and high-strength rotating track.

　　4.3. Produce 8 films at once.

5. Sealing part:

　　5.1. Adopt constant temperature (intelligent temperature control) hot pressing sealing, with adjustable sealing pressure.

　　5.2. Secondary sealing, secondary pre sealing, and secondary sealing to ensure a more secure seal.

　　5.3. The head material is copper, and there is a hand plate device at the bottom.

　　5.4. Each sealing temperature is intelligently adjusted for convenient temperature regulation and fault diagnosis.

6. Cup dispensing system:

　　6.1. Using mechanical cup dispensing

7. Transmission system:

　　7.1. Composed of motors, reducers, templates, etc., high-performance reducers.

　　7.2. The chain adopts 10A-1 or 12A-1 short pitch precision roller stainless steel thickened chain processed according to GB/T1243 standard.

　　7.3. Stainless steel sprocket shaft, bearings and base, green PE guide rail. Transmission translation, low impact force, accurate positioning.

8. Filling system:

　　8.1. The filling system uses a peristaltic pump for filling, with low failure rate, corrosion resistance, and adjustable filling volume.

　　8.2. The filling capacity is within the range of 30ul to 1000ul.

　　8.3. Filling accuracy: 2% volume ratio, meeting the accuracy requirements of 400UL+/-10UL.

3. Customized packaging machine equipment configuration technical parameters according to demand

　　1. Type: Fully automatic reagent filling line

　　2. Three phase four wire 380V/50Hz (customizable according to customer power supply voltage).

　　3. Power of approximately 11 kilowatts

　　4. Temperature control range 0-400 ℃ (easy to adjust)

　　5. Gas source approximately 0.8-1.0mpa

　　6. Speed of approximately 5000-6000 cups/h

　　7. Size 4000 * 1800 * 1800mm

　　8. The total weight of the machine is about 1800kg

AfterSalesService :

• Reagent aluminum foil sealing machine