Sell LDG-600 electromagnetic flowmeter LDG-600 electromagnetic flowmeter direct sales

Description :

　　This product has complete and practical functions, intuitive display, and easy operation, which can reduce the inconvenience caused by the English menu of other electromagnetic flow meters.

　　1、 Working principle

　　The working principle of electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. When a conductor moves in a magnetic field, an induced electromotive force is generated at both ends of the conductor perpendicular to the direction of the magnetic field and the direction of motion. The magnitude of electromotive force is directly proportional to the speed of conductor motion and the magnetic induction intensity of the magnetic field.

　　2、 Characteristics

　　Small size, light weight, easy installation, and low maintenance;

　　Wide measurement range, unaffected by changes in fluid temperature, density, pressure, viscosity, conductivity, etc;

　　It can be installed by drilling holes on old pipelines, with simple construction and installation, and a small amount of work;

　　Compared to general electromagnetic flow meters, it has lower costs and installation expenses, making it particularly suitable for measuring flow in large and medium-sized pipelines;

　　Adopting advanced processing technology, solid-state packaging, long service life, and ensuring good measurement accuracy and stability of the instrument;

　　Simple structure, sturdy and reliable, long service life (and suitable for measuring seawater);

　　There are no moving parts or resistance parts inside the measuring tube, no pressure loss, and no blockage will occur;

　　Reliable measurement and strong anti-interference ability.

　　3. Installation

　　1. Electromagnetic flow meters should be installed at lower and vertically upward positions in horizontal pipelines, avoiding installation at ultra-high points and vertically downward positions in pipelines;

　　2. The electromagnetic flowmeter should be installed at the rising point of the pipeline;

　　3. When installing an open discharge pipeline, it should be installed at the lower part of the pipeline;

　　4. If the pipeline drop exceeds 5m, install an exhaust valve downstream of the sensor;

　　5. Electromagnetic flow meters should be installed with control valves and shut-off valves downstream of the sensor, rather than upstream of the sensor;

　　6. Sensors cannot be installed at the inlet and outlet of the pump, but should be installed at the outlet of the pump;

　　7. The method of installing an electromagnetic flowmeter in the measuring well.

AfterSalesService :

• LDG-600 electromagnetic flowmeter