Aluminum alloy LUX spiral vortex flowmeter LUX-32 intelligent spiral vortex flowmeter

Description :

　　This product can work simultaneously with external power supply and battery power supply. Under normal circumstances, it is powered by 24V. In case of emergency or power outage, the built-in battery can continue to supply power, ensuring the normal recording and monitoring of data.

　　1、 Technical parameters:

　　Nominal diameter: DN15-DN200 (diameters larger than DN1600 can also be used)

　　Tested media: natural gas, air, nitrogen, biogas, etc

　　Basic error: ± 1.0%, ± 1.5%,

　　Work pressure: ≤ 6.3 MPa

　　Temperature of the tested medium: ＜ 80 ℃

　　Requirements for straight pipe section: upstream 0-5D, downstream 0-3D

　　Power supply: lithium battery and 24V DC

　　Display: 8-bit LCD displays instantaneous flow and cumulative flow

　　Output signal: (1) 4-20mA DC flow signal (2) HART protocol compliant output signal

　　Explosion proof performance: intrinsic safety type IbIICT5

　　Protection performance: IP65

　　2、 Main features:

　　1. No mechanical movable parts, corrosion-resistant, stable and reliable, long service life, long-term operation without special maintenance;

　　2. Implemented mechatronics integration, eliminating the need for manual monitoring in daily measurement processes;

　　3. The installation conditions for the process are not strict, and the straight pipe sections upstream and downstream of the instrument can be greatly shortened compared to orifice plates and vortex flowmeters;

　　4. The measurement accuracy of the system can meet the current trade measurement requirements (≤ 1.5%);

　　5. The flow measurement range is wide (qmax/qmin=15-20), which can effectively work in small flow areas that orifice plates and vortex flowmeters cannot access;

　　6. Small size, light weight, and convenient offline calibration;

　　7. The measurement signal can be displayed locally or transmitted remotely as needed.

　　3、 Installation:

　　1. Sensors can be installed in vertical, horizontal, or any inclined position according to the flow direction indicator;

　　2. When the pipeline is long or close to the vibration source, supports should be installed upstream and downstream of the flowmeter to eliminate the impact of pipeline vibration;

　　3. The installation location of the sensor should have sufficient space for the inspection and maintenance of the flowmeter, and should meet the environmental requirements of the flowmeter;

　　4. Avoid interference from strong external magnetic fields;

　　5. When installed and used outdoors, there should be a cover to avoid direct sunlight and rainwater erosion, which may affect the service life of the instrument;

　　6. When conducting pipeline pressure testing, attention should be paid to the pressure measurement range of the pressure sensor equipped on the intelligent flowmeter to avoid damaging the pressure sensor due to overpressure.

AfterSalesService :

• Aluminum alloy LUX spiral vortex flowmeter