Sales of DN65 electromagnetic flowmeter DN65 electromagnetic flowmeter direct sales

Description :

　　The main components of this product are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Such as water, sewage, mud, pulp, various acids, alkalis, salt solutions, food slurries, etc.

　　1、 Characteristics:

　　The measurement of flow rate is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. The sensor induced voltage signal is linearly related to the average flow rate, resulting in high measurement accuracy (0.3-0.5%).

　　There is no obstruction in the measuring pipeline, so there is no additional pressure loss, which has significant energy-saving significance.

　　There are no movable parts inside the measuring pipeline, so the sensor has a long lifespan.

　　The straight pipe section required for the sensor is relatively short, making it easy to install.

　　Reasonable selection of electrode and lining materials can resist corrosion and wear.

　　2、 Main technical data:

　　Power supply: 85V-250VAC/16V-36VDC;

　　Instrument display: High definition backlit LCD display (126 x 48 dot matrix), which can simultaneously display instantaneous, cumulative flow and other information and related units, with Chinese/English menu support;

　　Communication interface: It has digital communication signal outputs such as RS485, RS232, Hart, and Modbus;

　　Anti interference: Built in comprehensive anti-interference multi-level protection circuit with full digital processing, significant anti-interference performance, effectively eliminating on-site vibration and power frequency interference;

　　Data storage: With comprehensive data backup and recovery functions, on-site maintenance free;

　　Excitation method: Three types of excitation frequencies are standard, 1/10, 1/16, and 1/25 power frequency (1/4, 1/8, and 1/32 are optional), to meet more measurement needs;

　　Operation method: It has two functions: key operation and magnetic key operation. The operation is simple and fast, easy to learn and understand. Infrared handheld keyboard for remote non-contact operation.

　　3、 Installation:

　　You should stay away from equipment with strong magnetic fields.

　　Avoid places with strong vibrations and corrosiveness.

　　Pipelines that do not allow flow interruption should be equipped with shut-off valves and bypass pipelines when installing flow meters.

　　There should also be a certain straight pipe section upstream of the flowmeter sensor, usually between 5D and 10D.

　　It can be installed horizontally, vertically, and diagonally, but it is necessary to ensure that the measuring tube is coaxial with the process pipeline and that the measuring tube is always filled with liquid.

　　The measuring tube, housing, shielded wires of the leads, and the pipelines at both ends of the sensor must be reliably grounded.

AfterSalesService :

• DN65 electromagnetic flowmeter