Intelligent LUX Spiral Flow Meter LUX-32 Pipeline Spiral Flow Meter

Description :

　　This product is used for measuring the natural gas consumption of energy consuming equipment such as steam boilers and hot water heating furnaces in crude oil gathering and transportation stations. The steam and hot water generated by the above heating equipment are used as energy carrying working fluids for heat tracing and insulation in crude oil storage and transportation.

　　1、 Technical performance:

　　execution standard

　　The flowmeter shall comply with JJG 198-94 "Verification Regulations for Velocity Flowmeters".

　　Natural cyclone inlet vortex flowmeter flange connection type

　　Environmental conditions for use

　　Environmental temperature: -30 ℃~55 ℃

　　Relative humidity: 5% to 95%

　　Atmospheric pressure: 86KPa~106KPa

　　working conditions

　　Medium temperature range: -20 ℃ to 70 ℃

　　Nominal pressure: 1.6, 2.5, 4.0, 6.3 MPa

　　2、 Characteristics:

　　1. No mechanical movable parts, not easily corroded, stable and reliable, long service life, long-term operation without special maintenance;

　　2. Using 16 bit computer chips, high integration, small size, good performance, and strong overall functionality;

　　3. The intelligent flowmeter integrates a flow probe, microprocessor, pressure, and temperature sensors, and adopts a built-in combination to make the structure more compact. It can directly measure the flow rate, pressure, and temperature of the fluid, and automatically track compensation and compression factor correction in real time;

　　4. The use of dual detection technology can effectively improve the strength of detection signals and suppress interference caused by pipeline vibration.

　　3、 Product composition:

　　The natural cyclone vortex flowmeter consists of two parts: a sensor and a converter.

　　4、 Attention:

　　1. The intelligent vortex flowmeter can be installed in vertical, horizontal, or any inclined position according to the flow direction indicator.

　　2. When the pipeline is long or close to the vibration source, supports should be installed upstream and downstream of the flowmeter to eliminate the impact of pipeline vibration.

　　3. The installation location of the vortex flowmeter should have sufficient space for inspection and maintenance of the flowmeter, and should meet the environmental requirements of the flowmeter.

　　4. Avoid interference from strong external magnetic fields.

　　5. When installed and used outdoors, there should be a cover to avoid direct sunlight and rainwater erosion, which may affect the service life of the instrument.

　　6. During pipeline pressure testing, attention should be paid to the pressure measurement range of the pressure sensor equipped with the intelligent vortex flowmeter to avoid damage to the pressure sensor due to overpressure.

AfterSalesService :

• Intelligent LUX Spiral Vortex Flow Meter