Aluminum casting LUX vortex flowmeter LUX-32 natural cyclone vortex flowmeter

Description :

　　This product is widely used in industries such as petroleum, chemical, power, metallurgy, and urban gas supply. It is currently the product for measuring and trading natural gas transmission and distribution in oil fields and cities.

　　1、 Technical parameters:

　　1. The flow range is the flow range verified at the time of product delivery (at room temperature and atmospheric pressure, the medium is air 1.205Kg/m3); As the pressure increases, the flow range also expands.

　　2. Standard state conditions; P=101.325kPa，T=293.15K。

　　3. Usage conditions: Environmental temperature: -30~+60 ℃, medium temperature: -20~+80 ℃, relative temperature: 5%~95%, atmospheric pressure: 86kPa~106kPa.

　　4. Electrical performance indicators

　　Working power supply: external power supply:+24VDC, internal power supply: 3.6V lithium battery, overall energy consumption: external power supply,<1W, internal power supply,<0.3MW, lithium battery can be used for more than two years.

　　Output mode: frequency signal, 4-20mA signal, RS485 communication (capable of transmitting temperature, pressure, instantaneous flow rate, and cumulative flow rate parameters).

　　2、 Main features of the product:

　　1. No mechanical movable parts, not easily corroded, stable and reliable, long service life, long-term operation without special maintenance;

　　2. Using 16 bit computer chips, high integration, small size, good performance, and strong overall functionality;

　　3. The intelligent flowmeter integrates a flow probe, microprocessor, pressure, and temperature sensors, and adopts a built-in combination to make the structure more compact. It can directly measure the flow rate, pressure, and temperature of the fluid, and automatically track compensation and compression factor correction in real time;

　　4. The use of dual detection technology can effectively improve the strength of detection signals and suppress interference caused by pipeline vibration;

　　5. Advanced intelligent seismic technology effectively suppresses interference signals caused by vibration and pressure fluctuations.

　　3、 Attention:

　　1. It cannot be installed in places with strong vibration, and when the pipeline is long, the vibration generated by the pipeline must be eliminated upstream and downstream of the sensor.

　　2. When using an external power source, the flowmeter must have a reliable grounding and must not share the ground wire with the high-voltage system. During pipeline installation or maintenance, the ground wire shared by the welding system must not be overlapped with the flowmeter.

　　3. When installed outdoors, the upper part should be covered to prevent rainwater from entering or direct sunlight from affecting the service life of the vortex flowmeter.

　　4. In order to facilitate maintenance and not affect the normal transportation of fluids, a bypass pipeline must be installed. When the gas contains larger particles or longer fiber debris, a filter must be installed.

　　5. Installation should be carried out in accordance with relevant regulations for explosion-proof places, and relevant safety regulations should be followed during installation and maintenance.

　　6. There should be no strong external magnetic field interference or strong mechanical vibration around, and the influence of high temperature heat sources and radiation heat sources should be avoided, as well as the influence of highly corrosive environments.

AfterSalesService :

• Cast aluminum LUX spiral vortex flowmeter