Integrated DN400 electromagnetic flowmeter DN400 anti-corrosion electromagnetic flowmeter

Description :

　　This product does not cause blockages and has reliable measurement. It has strong anti-interference ability, small size, light weight, easy installation, low maintenance, wide measurement range, and is not affected by changes in fluid temperature, density, pressure, viscosity, conductivity, etc.

　　1、 Characteristics:

　　1. The measurement of flow rate is not affected by changes in density, viscosity, temperature, pressure, and conductivity of the flow rate. The sensor induced voltage signal is linearly related to the average flow rate, resulting in high measurement accuracy

　　2. There is no obstruction in the measuring pipeline, so there is no additional pressure loss. There are no movable parts in the measuring pipeline, so the sensor has a long lifespan

　　3. The straight pipe section required for the sensor is relatively short, making it easy to install

　　4. The sensor part only has the inner lining and electrodes in contact with the measured liquid. As long as the electrode and inner lining materials are selected reasonably, they can resist corrosion and wear

　　5. A bidirectional measurement system that can measure both forward and reverse flow rates.

　　2、 Installation:

　　In order to ensure the stable and reliable operation of the flowmeter, the following requirements should be noted when selecting the installation location:

　　1. Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields (such as large motors, transformers, etc.) to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　2. It should be installed in a dry and ventilated place as much as possible, avoiding direct sunlight and rain. The ambient temperature should be between -20 and+60 ℃, and the relative humidity should be less than 85%.

　　3. There should be ample space around the flowmeter for easy installation and maintenance.

　　3、 Selection:

　　Firstly, it is necessary to have a profound understanding of the structural principles and fluid characteristics of flow meters, while also selecting based on the specific situation on site and the surrounding environmental conditions. We also need to consider economic factors. In general, the selection should be made from the following five aspects: ① Performance requirements for flow meters; ② Fluid characteristics; ③ Installation requirements; ④ Environmental conditions; ⑤ The price of the flow meter.

　　Firstly, collect data from flow meters for personal selection and decision-making.

　　Secondly, when purchasing, it is necessary to first clarify what the instrument is intended to measure and whether there are any special requirements.

　　Thirdly, during use, what is the required flow range of the electromagnetic flowmeter so as not to render the purchased flowmeter unusable.

　　Fourthly, before purchasing, it is necessary to have an understanding of the working pressure of the measuring object, and then choose a suitable flowmeter based on the working pressure.

AfterSalesService :

• Integrated DN400 electromagnetic flowmeter