Intelligent LUGB Vortex Flow Meter LUGB-100 Steam Vortex Flow Meter

Description :

　　This product has an LCD meter display, real-time temperature, real-time pressure, instantaneous flow rate, and flow accumulation. It also has temperature and pressure compensation functions. When measuring gas and steam, it can be compensated by checking the table based on the measured temperature and pressure to ensure that the flow rate is not affected by changes in temperature and pressure, which may affect the accuracy of the flow meter due to changes in vapor density.

　　1、 Technical parameters:

　　Measurement medium: gas, liquid, vapor

　　Connection methods: flange card type, flange type, plug-in type

　　Measurement accuracy: Level 1.0, Level 1.5

　　Measurement temperature: normal temperature -25 ℃~100 ℃, high temperature -25 ℃~150 ℃ -25 ℃~250 ℃

　　Output signal: Pulse voltage output signal, high level 8-10V, low level 0.7-1.3V, pulse duty cycle of about 50%, transmission distance of 100m, pulse current remote transmission signal 4-20mA, transmission distance of 1000m

　　Environmental temperature: -25 ℃~+55 ℃ Humidity: 5-90% RH50 ℃

　　Shell material: stainless steel, aluminum alloy

　　Power supply: DC24V or lithium battery 3.6V

　　Explosion proof grade: intrinsic safety type iaIIbT3-T6

　　Protection level: IP65

　　2、 Characteristics:

　　1. It can accurately measure the flow rates of gases, liquids, and vapors over a wide range of flow rates without being affected by fluid physical properties.

　　2. Not affected by temperature and pressure, and not easily blocked, stuck, or scaled, resistant to high temperatures and pressures,

　　3. Safe and explosion-proof, suitable for harsh environments

　　4. Designed with no movable parts, no holes or gaps, the product is wear-resistant, dirt resistant, and does not require mechanical maintenance, with a long service life

　　5. Adopting low-power high-tech and battery powered on-site display flowmeter, it can operate continuously for more than two years without electricity;

　　6. Integrated design of temperature and pressure compensation;

　　7. The current output is all electrically isolated, with good common mode interference suppression capability;

　　8. Simultaneously display traffic values and cumulative traffic values, without the need to switch between them.

　　9. Adopting anti vibration probes to effectively eliminate the influence of external vibrations.

　　10. The circuit adopts surface mount technology, with a compact structure and high reliability.

　　3、 Installation:

　　1. The installation position should be selected as much as possible in a location without pipeline vibration or with low vibration, and the vibration acceleration should not exceed 2g. If the vibration is large, vibration reduction measures need to be taken;

　　2. There must be sufficient straight pipe sections upstream and downstream of the flowmeter;

　　3. The maintenance valve is installed upstream of the sensor, and the flow control valve is installed downstream of the sensor;

　　4. Try to choose a location that is easy to install and maintain;

　　5. Choose a location with a dry environment;

　　6. Sensors can be installed on horizontal or vertical pipelines. But when installed on a vertical pipeline, the medium must flow from bottom to top.

AfterSalesService :

• Intelligent LUGB Vortex Flow Meter