Steam LUGB-65 Vortex Flow Meter

Description :

　　Steam LUGB-65 Vortex Flow Meter

　　This product is widely used for measuring fluids in industries such as petroleum, chemical, metallurgical, papermaking, power generation, and water conservancy. The flowmeter has no movable parts, strong reliability, high accuracy, and long service life. It can accurately measure the instantaneous flow rate and cumulative flow rate of fluids over a wide flow range.

　　1、 Technical parameters:

　　Measurement medium: gas, liquid, vapor

　　Connection methods: flange card type, flange type, plug-in type

　　Measurement accuracy: Level 1.0, Level 1.5

　　Measurement temperature: normal temperature -25 ℃~100 ℃, high temperature -25 ℃~150 ℃ -25 ℃~250 ℃

　　Output signal: Pulse voltage output signal, high level 8-10V, low level 0.7-1.3V, pulse duty cycle of about 50%, transmission distance of 100m, pulse current remote transmission signal 4-20mA, transmission distance of 1000m

　　Environmental temperature: -25 ℃~+55 ℃ Humidity: 5-90% RH50 ℃

　　Shell material: stainless steel, aluminum alloy

　　Power supply: DC24V or lithium battery 3.6V

　　Explosion proof grade: intrinsic safety type iaIIbT3-T6

　　Protection level: IP65

　　Steam LUGB-65 Vortex Flow Meter

　　2、 Installation method:

　　1. The installation position should be selected as much as possible in a location without pipeline vibration or with low vibration, and the vibration acceleration should not exceed 2g. If the vibration is large, vibration reduction measures need to be taken;

　　2. There must be sufficient straight pipe sections upstream and downstream of the sensor;

　　3. The maintenance valve is installed upstream of the sensor, and the flow control valve is installed downstream of the sensor;

　　4. Try to choose a location that is easy to install and maintain;

　　5. Choose a location with a dry environment;

　　6. Sensors can be installed on horizontal or vertical pipelines. But when installed on a vertical pipeline, the medium must flow from bottom to top.

　　7. Sensors should be installed indoors as much as possible. When installed outdoors, attention should be paid to waterproofing, and cables outside the amplifier should be bent into a U-shape;

　　8. Sensors should be kept away from electrical noise, such as high-power frequency converters, high-power transformers, motors, and high-power wireless transceivers.

　　3、 Characteristics:

　　1. Steam, gas, and liquid can all be measured;

　　2. Low pressure loss;

　　3. No compensation is required when measuring volumetric flow rate;

　　4. Components with simple structure and no motion wear and tear;

　　5. High precision, high reliability, no need for on-site debugging;

　　6. Easy to install and maintain;

　　7. It can transmit traffic signals over long distances, connect with computers, and achieve integrated management.

AfterSalesService :

• LUGB Vortex Flow Meter