Integrated LDE-125 electromagnetic flowmeter

Description :

　　Integrated LDE-125 electromagnetic flowmeter

　　The main structure of this product consists of a magnetic circuit system, measuring conduit, electrode, housing, lining, and converter.

　　1、 Installation:

　　1. It should be installed indoors in a dry and ventilated area. Avoid installation in areas with high ambient temperatures, avoid strong vibrations, and try to avoid equipment with strong magnetic fields. Such as large motors, transformers, etc. Avoid installation in environments with corrosive gases. The installation location should be convenient for maintenance, which is the environmental condition to ensure the normal operation of the transmitter.

　　2. Valves and bypasses should be installed at both ends of the electromagnetic flow transmitter.

　　3. In order to ensure that the measuring tube of the electromagnetic flow transmitter is filled with the measured medium, it is installed vertically and flows from bottom to top. Especially for liquid-solid two-phase flow, it must be installed vertically. If only horizontal installation is allowed on site, it must be ensured that the two electrodes are on the same horizontal plane.

　　4. To avoid interference signals, the signal between the transmitter and the converter must be transmitted using shielded wires. It is not allowed to parallel signal cables and power lines in the same cable steel pipe. The length of signal cables should generally not exceed 30m.

　　Integrated LDE-125 electromagnetic flowmeter

　　2、 Technical parameters:

　　Accuracy level: ± 0.5%, ± 1%

　　Lining materials: polyurethane, chloroprene rubber, polytetrafluoroethylene, etc

　　Electrode materials: stainless steel, Hastelloy, titanium, platinum iridium alloy, etc

　　Connection methods: flange clamping, flange connection, etc

　　Medium temperature: 0 ℃~70 ℃, 0 ℃~130 ℃ (0 ℃~180 ℃)

　　Nominal pressure: 1.0Mpa~32 Mpa

　　Protection level: IP65, IP68

　　Explosion proof mark: ExdiiBT4

　　Working voltage: 220VAC, 24VDC

　　3、 Functional features:

　　1. Adopting programmable low-frequency rectangular excitation waves with good stability;

　　2. Adopting a 16 bit embedded microprocessor, it has fast computing speed and high accuracy;

　　3. Adopting full digital processing, it has strong anti-interference ability, stable performance, and a measurement range of up to 150:1

　　4. Adopting high-definition LCD backlight LCD display;

　　5. It has bidirectional flow measurement and bidirectional total accumulation functions, and bidirectional output functions for current and frequency;

　　6. Optional M-bus and HART protocols;

　　7. Equipped with self checking and self diagnostic functions;

　　8. Widely used in industrial technology and management departments such as chemical industry, environmental protection, metallurgy, medicine, papermaking, water supply and drainage.

AfterSalesService :

• LDE electromagnetic flowmeter