LDE-DN300 electromagnetic flowmeter
Category:
Instrumentation/Flow meter/electromagnetic flowmeter
Model:
LDE-300
Brand:
Jiangsu Fenghui Instrument Co., Ltd
Retail Price
2,800.00USD
重量
kg
- Product Description
-
Description :
LDE-DN300 electromagnetic flowmeter
This product is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including highly corrosive liquids such as acids, alkalis, salts, etc.
1、 Characteristics:
The structure is simple, reliable, without moving parts, and has a long working life.
No flow blocking components, no pressure loss or fluid blockage.
No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems.
The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.
Different combinations of PTFE or rubber lining materials and electrode materials such as HC, HB, 316L, Ti can adapt to the needs of different media.
There are various flow meter models available, including pipeline type and plug-in type.
Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability.
It has two forms: integrated and separated.
High definition LCD backlit display.
LDE-DN300 electromagnetic flowmeter
2、 Performance indicators:
Flow velocity measurement range: (0.05-10) m/s
Power consumption:<15VA
Protection level: IP68
Connection method: flange connection
Electrode materials: molybdenum containing stainless steel OCr18Ni12Mo2Ti, Hastelloy B, Hastelloy C, titanium Ti, tantalum, etc
Measuring pipeline diameter: DN (32-6000) mm
Instrument accuracy: Level 1.0
Work pressure: ≤ 1.6MPa
Medium temperature: 0-80 ℃
3、 Selection:
The selection of instruments is a very important task in instrument applications. According to relevant data, 2/3 of instrument failures in practical applications are caused by incorrect selection and installation of instruments, and special attention should be paid.
collect data
① Name of the tested fluid;
② Flow range;
③ Work pressure;
④ Working temperature.
The tested fluid must have a certain conductivity, with a conductivity of ≥ 5uS/cm.
The actual working pressure must be less than the rated working pressure of the flowmeter.
The working temperature must meet the temperature requirements specified by the flowmeter.
Determine if there is negative pressure present.
AfterSalesService :
Key words:- DN300 electromagnetic flowmeter
