LDE-150 electromagnetic flowmeter price

Description :

　　LDE-150 electromagnetic flowmeter price

　　While meeting on-site display requirements, it can also output 4-20mA current signals for recording, regulation, and control purposes. It has been widely used in industrial technology and management departments such as chemical, environmental protection, metallurgy, pharmaceuticals, papermaking, and water supply and drainage.

　　1、 Performance characteristics:

　　There are no movable parts or flow blocking components inside the pipeline, and there is almost no additional pressure loss during measurement.

　　The measurement results are independent of physical parameters such as flow velocity distribution, fluid pressure, temperature, density, viscosity, etc.

　　On site, the range can be modified online according to the actual needs of the user.

　　High definition backlit LCD display, fully Chinese menu operation, easy to use, simple to operate, easy to learn and understand.

　　Adopting SMD devices and surface mount technology (SMT circuits have high reliability).

　　Adopting a 16 bit embedded microprocessor, it has fast computing speed, high accuracy, programmable low-frequency rectangular wave excitation, improved stability of flow measurement, and low power consumption.

　　All digital processing, strong anti-interference ability, reliable measurement, high accuracy, and a flow measurement range of up to 150:1

　　LDE-150 electromagnetic flowmeter price

　　2、 Technical parameters:

　　Instrument accuracy: pipeline type 0.5 level, 1.0 level; Insertion type 2.5 level

　　Measurement medium: various liquid and liquid-solid two-phase fluids with conductivity greater than 5 μ S/cm.

　　Flow velocity range: 0.2-8m/s

　　Work pressure: 1.6MPa

　　Environmental temperature: -40 ℃~50 ℃

　　Medium temperature: PTFE lining ≤ 180 ℃??????

　　Rubber material lining ≤ 65 ℃

　　Explosion proof mark: Exmibd Ⅱ BT4

　　Explosion proof certificate number: GYB01349

　　External magnetic interference: ≤ 400A/m

　　Shell protection: integrated type: IP65;

　　Detached type: Sensor IP68 (5 meters underwater, limited to rubber lining)

　　Converter IP65

　　Output signal: 4-20mA.DC, load resistance 0-750 Ω

　　Communication output: RS485 or CAN bus

　　Electrical connection: M20 × 1.5 internal thread, φ 10 cable hole

　　Power supply voltage: 90-220V.AC, 24 ± 10% V.DC

　　Power consumption: ≤ 10VA

　　3、 Selection:

　　1. The accuracy level and function of the instrument are selected based on measurement requirements and usage scenarios to achieve cost-effectiveness. For example, in situations such as trade settlement, product handover, and energy measurement, higher accuracy levels such as 1.0, 0.5, or higher should be selected; For process control applications, choose different accuracy levels according to control requirements; In some cases where only the process flow rate needs to be detected without precise control and measurement, a slightly lower accuracy level can be chosen, such as 1.5, 2.5, or even 4.0,.

　　2. When measuring medium flow rate, instrument range, and caliber, the full flow rate of the flowmeter can be selected within the range of 0.5-12m/s for measuring medium flow rate, which is relatively wide. The selection of instrument specifications (caliber) may not necessarily be the same as the process pipeline, and should be determined based on whether the measured flow range is within the flow rate range. That is, when the pipeline flow rate is too low to meet the requirements of the flow instrument or the measurement accuracy cannot be guaranteed at this flow rate, the instrument port diameter needs to be reduced to increase the flow rate inside the pipeline and obtain satisfactory measurement results.

　　3. Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields as much as possible to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　4. There should be ample space around the flowmeter for easy detection and maintenance.

AfterSalesService :

• LDE electromagnetic flowmeter