Stainless steel LUGB-100 vortex flowmeter

Description :

　　Stainless steel LUGB-100 vortex flowmeter

　　1、 Overview:

　　The FH-LUGB series vortex flowmeter is a new type of flow meter that adopts a new generation of flow sensors and has many advantages that cannot be achieved by other flowmeters. Compared with similar products at home and abroad, it has many new features. It is made proportional to the number of vortices generated by inserting objects into the fluid and the flow velocity.

　　2、 Product features:

　　1. Adopting SINER's advanced low-power technology from the UK, it has high technological content, stable performance, high precision, and long lifespan.

　　2. No mechanical maintenance required, long service life, safe and explosion-proof, suitable for harsh environments;

　　3. Exquisite design in appearance, simple and sturdy structure, no movable parts, high reliability, and reliable long-term operation;

　　4. Good seismic performance, zero drift free, effectively eliminating external vibration shadows;.

　　5. The output is a pulse signal proportional to the flow rate, without zero drift;

　　6. Wide measurement range, with a range ratio of up to 10:1;

　　7. On site LCD display, with instantaneous flow rate, cumulative total amount, percentage, and frequency display, without the need to switch alternately;

　　8. Local button settings, convenient for parameter adjustment, no need for handheld communicator;

　　9. Low pressure loss, wide dynamic measurement range, low operating costs, and all-round energy saving;

　　10. Density calculation, temperature and pressure compensation calculation, online verification of compensation calculation formulas, and remote control can be achieved by adding secondary instruments.

　　Stainless steel LUGB-100 vortex flowmeter

　　3、 Technical indicators:

　　1. Measurement media: liquid, gas, saturated vapor, superheated vapor.

　　2. Accuracy level: ± 1.0% for liquids, ± 1.5% for gases (vapors), and ± 2.5% for insertions.

　　3. Working pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa.

　　4. Medium temperature: Ordinary type -40~150 ℃ Medium temperature type -40~250 ℃ High temperature type -40~350 ℃.

　　5. Output signal: Three wire voltage pulse, low level 0-1V, high level>4V, duty cycle 50%; The standard current for two-wire system is 4-20mA; the standard current for two-wire system is 0-10mA.

　　6. Working environment: -35 ℃ to+60 ℃, humidity ≤ 95% RH.

　　7. Working power supply: DC12V; DC24V。

　　8. Shell material: carbon steel, stainless steel.

　　9. Explosion proof type: intrinsic safety ExibIICT6.

　　4、 Selection:

　　① When the measured medium is a compressible fluid and the temperature and pressure changes of the medium on site are significant, it is recommended to use a vortex street sensor with pulse signal remote transmission and a flow integrator with temperature and pressure compensation. Pressure transmitters, temperature transmitters, or Pt100 need to be purchased separately by the user.

　　② The flowmeter is installed indoors in a better environment without the need for remote signal transmission. It only needs to read the flow value on site, and the installation location of the flowmeter is convenient for operation and data reading. It is recommended that users choose a battery powered on-site direct reading vortex flowmeter. However, if the flowmeter is installed outdoors and exposed to the atmosphere, a battery powered on-site direct reading vortex flowmeter is generally not selected.

　　③ When the installation environment of the flowmeter is poor or the installation location is not convenient for on-site reading of flow values or centralized management, it is recommended to use sensors that output pulse signals and are equipped with flow integrators, or vortex street transmitters with 4-20mA standard current output.

　　④ When on-site flow observation and remote signal transmission are required, it is recommended to use a vortex street transmitter with on-site direct reading and 4-20mA output.

　　⑤ When on-site reading is not required and only standard signals are transmitted remotely, it is recommended to use a vortex street transmitter with a 4-20mA standard current output.

AfterSalesService :

• LUGB Vortex Flow Meter