LDE-400 Pipeline Electromagnetic Flow Meter

Description :

　　LDE-400 Pipeline Electromagnetic Flow Meter

　　This product is widely used for flow measurement of conductive liquids in industries such as tap water, chemical, coal, environmental protection, textile, metallurgy, and papermaking.

　　1、 Characteristics:

　　The sensor adopts an integral welded structure with good sealing performance;

　　The structure is simple and reliable, with no moving parts inside and almost no pressure loss;

　　The measurement accuracy is not affected by changes in physical parameters such as pressure, temperature, density, viscosity, etc. of the measured medium; Accuracy is not sensitive to changes in velocity distribution (except for vortices);

　　Equipped with conductivity measurement function, it can distinguish whether the sensor is empty or not; Adopting a 16 bit embedded microprocessor, it has fast computing speed and high accuracy; There are two integrators inside, which display forward and reverse accumulation and difference accumulation respectively; Capable of outputting RS485 or RS232C digital communication signals;

　　Containing digital processing, strong resistance to F-interference, reliable measurement, and high accuracy; The instrument is sensitive, the output signal is proportional to the current, and the range ratio is wide;

　　Ultra low EMI switching power supply is suitable for a wide range of power supply voltage changes and has good EMC resistance performance; It includes Chinese and English menu operations, easy to use, simple to operate, easy to learn and understand.

　　LDE-400 Pipeline Electromagnetic Flow Meter

　　2、 Technical parameters:

　　Accuracy level: ± 0.5%, ± 1%

　　Lining materials: polyurethane, chloroprene rubber, polytetrafluoroethylene, etc

　　Electrode materials: stainless steel, Hastelloy, titanium, platinum iridium alloy, etc

　　Connection methods: flange clamping, flange connection, etc

　　Medium temperature: 0 ℃~70 ℃, 0 ℃~130 ℃ (0 ℃~180 ℃)

　　Nominal pressure: 1.0Mpa~32 Mpa

　　Protection level: IP65, IP68

　　Explosion proof mark: ExibBT4

　　Working voltage: 220VAC, 24VDC

　　3、 Installation precautions:

　　Avoid lightning strikes

　　Ensure ventilation and dryness, avoid excessive temperature, humidity, and corrosive gases

　　Electromagnetic flow meters installed outdoors should have shading and rainproof measures, and avoid direct sunlight exposure

　　4、 Daily maintenance:

　　Regularly check whether the electromagnetic flowmeter converter is immersed in water, damp, or corroded

　　Regularly clean the electrodes and measuring tubes, and do not damage the electrodes and lining during cleaning

　　Regularly check whether the aging and contact degree of the connecting cables are intact

AfterSalesService :

• LDE electromagnetic flowmeter