Fenghui Instrument LDG-100 Electromagnetic Flow Meter

Description :

　　Fenghui Instrument LDG-100 Electromagnetic Flow Meter

　　This product has no flow blocking components, and there is no pressure loss or fluid blockage. The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.

　　1、 Installation:

　　⑴ Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields (such as large motors, transformers, etc.) to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　⑵ It should be installed in a dry and ventilated place as much as possible, and should not be installed in damp or water prone areas.

　　⑶ Avoid direct sunlight and rain as much as possible, and avoid environmental temperatures above 60 ℃ and relative humidity above 95%.

　　⑷ Choose a place that is easy to maintain and has convenient activities.

　　The flowmeter should be installed at the rear end of the water pump and must not be installed on the suction side; The valve should be installed on the downstream side of the flow.

　　Fenghui Instrument LDG-100 Electromagnetic Flow Meter

　　2、 Technical parameters:

　　Caliber: DN10-DN2000 (mm) Special customizable

　　Nominal pressure: 0.6-4.0MPa (differentiated by caliber, special high pressure can be customized)

　　Electrode materials: 316L stainless steel, Hastelloy C, Hastelloy B, titanium, tantalum, platinum iridium electrode

　　Lining materials: polytetrafluoroethylene (PTFE), perfluoroethylene propylene (FEP), chloroprene rubber (Ne), polyurethane rubber (PU)

　　Medium temperature: -40~180 ℃ (limited by the temperature resistance characteristics of the lining material, as follows:

　　Neoprene rubber lining: -40~+80 ℃ Polyurethane rubber lining: -10~+60 ℃

　　PTFE lining: -30~+120 ℃, PTFE lining: -30~+180 ℃

　　Shell material carbon steel (customizable stainless steel shell)

　　Protection levels IP65, IP67, IP68

　　Working power supply 220VAC, 24VDC

　　Current output 4~20mA

　　3、 Product features:

　　1. Suitable for volumetric flow measurement of conductive fluids with conductivity greater than 5 ц s/cm.

　　2. There are no active or obstructed components inside the measuring tube, and the pressure loss is small.

　　3. Lining and electrodes made of different materials have good anti-corrosion performance.

　　4. Not affected by medium, density, viscosity, temperature, pressure, and conductivity.

　　5. Low frequency rectangular wave excitation, less susceptible to interference, stable and reliable.

　　6. The converter has low energy consumption, simple and convenient installation, and users do not need to debug.

AfterSalesService :

• LDG electromagnetic flowmeter