6kN YL-2027 Handheld Precision Display Instrument for Anti bending Machine

Description :

6kN YL-2027 Handheld Precision Display Instrument for Anti bending Machine Standard Force Gauge Product Features:Shenzhen Youzhongli Company produces various types of large-scale weighing and force measuring sensors. Youzhongli strictly controls each production and testing data with strict process requirements. A large range sensor tests the production capacity and scale of a manufacturer. We strictly control the production process of 150t to 3000t large range sensors, which comply with the national C3 level weighing/force measurement standards of 0.1% and 0.3%. They can pass the measurement and testing report of the National Institute of Metrology, with good long-term stability and repeatability. Please place an order in advance based on your needs.

　　The usage method of standard force measuring instruments is particularly important. Improper operation may affect the service life of the force measuring instrument and cause damage to the instrument. We hope the following methods can be helpful to you.

　　1. It is made according to the principle that the greater the tension applied to the spring, the longer the spring will elongate;

　　2. Observe smaller scale values: What N does each small grid of the spring scale represent;

　　3. Observation range: Observe the larger scale value on the spring scale panel, and be careful not to apply force beyond its range;

　　4. Apply tension along the central axis of the spring on the spring scale;

　　5. Zero point calibration: Check if the pointer is pointing to the zero position. If not, adjust it to the zero mark;

　　Before use, gently pull the spring a few times to avoid it getting stuck;

　　7. Observe that the pointer reading line is perpendicular to the scale line;

　　Before measurement, the spring should naturally sag and check if the pointer is aligned with the zero mark;

　　9. The measured force cannot exceed its measurement range;

　　10. The reading must be read in a stationary state.

　　In order to maintain the confidence level of the verification/calibration status of the 0.3 level standard force measuring instrument in the laboratory, while correctly using and maintaining the standard force measuring instrument, it is also necessary to carefully conduct periodic verification and measurement device error analysis. This will help us to timely detect and eliminate abnormal variations during the verification/calibration process, minimize the measurement error of the device, and ensure the consistency of the verification/calibration results of the testing machine.

Standard force gauge 6kN YL-2027 handheld precision display device for anti bending machine picture:

AfterSalesService :

• 6kN standard force gauge for anti bending machine