1100kg cantilever beam weighing sensor HLCB1D1-1.1t German HBM load sensor

Description :

　　1100kg cantilever beam type weighing sensor HLCB1D1-1.1t German HBM load sensor detailed description: YOLO-LOADCELL, a large through-hole force sensor from Youzhongli brand, customized non-standard force sensor, with an annual production capacity of 1000 sets or more, 200 tons or less, providing force sensors year-round, 300 sets of dedicated force sensors for 500 tons or more, 120 sets of pressure sensors for 1000 tons or more, various aluminum weighing sensors, alloy steel weighing sensors, stainless steel weighing sensors, micro tension and pressure sensors with an annual production capacity of more than 15 units, standard force measuring instruments for measurement with an annual production capacity of more than 2000 units, and various weighing force measuring instruments with an annual production capacity of more than 5000 units. The sensor accuracy is C3, and some products can reach C6 level ultra-high precision,

　　1100kg cantilever beam weighing sensor HLCB1D1-1.1t German HBM load sensor:

　　HLCB1D1-10T German HBM weighing sensor:

　　Product brand: German HBM weighing sensor, HBM weighing sensor

　　Product Features:

　　Name: Shear Beam Sensor

　　Accuracy: C3 and D1 (optional)

　　Material: Stainless steel

　　Low structural height

　　Compliant with EN4550:2015 electromagnetic compatibility requirements

　　Up to 6000 OIMLR60 compliant parts can be calibrated

　　Explosion proof specifications comply with ATEX+IECEX (optional)

　　Can be used in harsh industrial environments

　　Application: Weighing scales, truck scales, track scales, material tanks

　　Range options: 110kg, 220kg, 550kg; 1.1t，1.76t，2.2t，4.4t，10t

　　Installation precautions for sensors

　　1. The installation surface and base of the sensor should be kept level and not skewed;?

　　2. The horizontal difference between the installation surfaces in a multi load sensor weighing system is less than 5mm. If the measurement accuracy of the system is low (5/1000), it can be relaxed;?

　　3. The installation surface of the sensor should be kept flat and smooth, and there should be no adhesive film, burrs, sharp points, etc. on the installation surface;?

　　4. The installation surface base should be firm and maintain a certain thickness;?

　　5. The base area of the installation surface should be larger than the installation area of the weighing sensor;?

　　6. When installing or replacing sensors, it is necessary to choose a suitable torque wrench and adjust it to the torque required for tightening the sensor;?

　　7. Sensors that require installation of washers need to be fitted with washers on the bolts before installation;?

　　8. Before tightening the bolts, apply a small amount of butter to prevent rusting and facilitate disassembly and assembly;?

　　9. It is strictly prohibited to arbitrarily lengthen or shorten a certain part of the sensor cable in a multi load sensor weighing system;?

　　10. In a single weighing sensor weighing system, if installation conditions permit, it is recommended not to lengthen or cut the sensor cable;?

　　11. After the cable is connected to the junction box, the signal line of each sensor should be connected to the corresponding terminal post. It is strictly prohibited to connect two or more cable signal lines to the same terminal post at the same time;

　　12. After the sensor wiring is completed, if the wiring holes in the junction box are not in use, they should be blocked with plugs and sealed to prevent moisture and dust from entering;

　　13. The vertical and horizontal limit clearances should be adjusted according to the instructions in the weighing equipment installation manual during installation and maintenance;?

　　14. The gap adjustment of the limit should be checked or adjusted regularly according to the frequency of daily train usage during daily maintenance;?

　　15. When installing the upper and lower connectors, they must be kept perpendicular to the weighing sensor and not skewed;?

　　16. Butter should be applied to the bearings and threads of the connecting components to maintain lubrication, prevent rusting, and facilitate sensor replacement.

　　1100kg cantilever beam weighing sensor HLCB1D1-1.1t German HBM load sensor:

AfterSalesService :

• HLCB1D1-1.1t