SB-5T original sensor 5000kg cantilever beam sensor
Category:
electron/Sensors, sensitive components/force sensor
Model:
SB-5T
Brand:
Youzhongli
model:
SB-5T
manufacturing process:
integration
output signal:
Simulated type
material:
metal
Physical properties of materials:
conductor
Material crystal structure:
single crystal
Is it imported:
No
Temperature compensation range:
-10-40
sensitivity:
two
Operating Temperature:
-35~+70
input impedance:
four hundred and sixty
Output impedance:
three hundred and fifty
insulation resistance:
five thousand
insulation resistance:
five thousand
nonlinear:
zero point zero two
repetitiveness:
zero point zero one
hysteresis:
zero point zero two
Working Voltage:
5-12
quantity:
five hundred and forty
batch number:
-
Retail Price
140.00USD
重量
kg
- Product Description
-
model SB-5T
manufacturing process integration
output signal Simulated type
material metal
Physical properties of materials conductor
Material crystal structure single crystal
Is it imported No
Temperature compensation range -10-40
sensitivity two
Operating Temperature -35~+70
input impedance four hundred and sixty
Output impedance three hundred and fifty
insulation resistance five thousand
insulation resistance five thousand
nonlinear zero point zero two
repetitiveness zero point zero one
hysteresis zero point zero two
Working Voltage 5-12
quantity five hundred and forty
batch number -
Description :
SB-5T original sensor 5000kg cantilever beam sensor product introductionThe main products include weighing sensors, weighing modules, force sensors, various customized weighing force sensors, weighing displays, and standard force measuring instruments. The registered capital of the enterprise is 10 million yuan, covering an area of 4500 square meters. The annual production capacity is 200000 various weighing/force sensors and 50000 applied instruments and meters. In 2015, the enterprise was listed as one of the 1000 sustainable development supported enterprises in the province by the Provincial Economic and Information Commission.
1. Characteristic error. It is caused by the device itself, including DC drift values, incorrect slopes, or non-linear slopes. After all, there will be a gap between the ideal transfer function characteristics and the actual characteristics of the device.
2. Application error of weighing sensor. That is, errors caused by various operational errors, including incorrect placement of probes, incorrect insulation between probes and measurement locations, errors in the purification process of air or other gases, and incorrect placement of transmitters.
3. Dynamic error. Sensors suitable for static conditions have strong damping, so they respond slowly to changes in input parameters, even taking several seconds to respond to temperature step changes. Some load cells with delay characteristics may generate dynamic errors when responding to rapid changes. Response time, amplitude distortion, and phase distortion can all lead to dynamic errors.
4. Insertion error. It is an error caused by changing the measurement parameters when inserting a sensor into the system. The use of a transmitter that is too large for the system, the system's dynamic characteristics are too slow, and the system's self heating loads too much thermal energy, all of which can lead to insertion errors.
SB-5T original sensor 5000kg cantilever beam sensor picture：
AfterSalesService :
Key words:- 5000kg cantilever beam sensor
