0.1 level 20kN standard force gauge S-type tensile and compressive force sensor laboratory standard calibration force gauge

Description :

0.1 level 20kN standard force gauge S-type tensile and compressive force sensor laboratory standard calibration force gauge product introduction and descriptionShenzhen Youzhongli Technology Co., Ltd. is dedicated and focused on force sensors, specializing in micro force measurement solutions and micro force sensor selection. We can customize non-standard force sensors and provide customers with suitable weighing and force measurement solutions according to their needs, with high selectivity and cost-effectiveness for weighing and force sensors. For more questions on force measurement and weighing, please feel free to consult Shenzhen Youzhongli Technology Co., Ltd.

　　A standard force gauge is a highly accurate and reliable force (torque) measurement instrument. After years of improvement, this instrument can be applied in fields such as force (or torque) measurement, weighing control, sensor adjustment and detection, material performance testing, stress-strain measurement, transient peak measurement, etc. It has the advantages of high reliability and stability, complete functions, high measurement accuracy, convenient use, and intuitive display. It is the most ideal tool for measurement technology institutions to transmit, verify, calibrate, and perform performance testing of force, quality, hardness, etc.

　　The usage method of standard force measuring instruments is particularly important. Improper operation may affect the service life of the force measuring instrument and cause damage to the instrument. We hope the following methods can be helpful to you.

　　1. It is made according to the principle that the greater the tension applied to the spring, the longer the spring will elongate;

　　2. Observe smaller scale values: What N does each small grid of the spring scale represent;

　　3. Observation range: Observe the larger scale value on the spring scale panel, and be careful not to apply force beyond its range;

　　4. Apply tension along the central axis of the spring on the spring scale;

　　5. Zero point calibration: Check if the pointer is pointing to the zero position. If not, adjust it to the zero mark;

　　Before use, gently pull the spring a few times to avoid it getting stuck;

　　7. Observe that the pointer reading line is perpendicular to the scale line;

　　Before measurement, the spring should naturally sag and check if the pointer is aligned with the zero mark;

　　9. The measured force cannot exceed its measurement range;

　　10. The reading must be read in a stationary state.

　　Mainly used for the calibration and verification of force measuring instruments and equipment such as material testing machines and presses. It can also be used for measuring, verifying, and calibrating the "force value" of other related instruments, equipment, components, and parts. Its prominent features are reliable data, stable quality, no aging, no wear and tear, and it belongs to a sex measuring instrument. It is an economical, easy-to-use, convenient, accurate and safe measuring instrument. It is a standard force measuring instrument for various quality and technical supervision, metrological testing, scientific research institutes, universities, quality inspection institutions, relevant departments, and enterprises

0.1 level 20kN standard force gauge S-type tensile and compressive force sensor laboratory standard calibration force gauge:

AfterSalesService :

• 0.1 level 20kN standard force measuring instrument