0.1 level standard force gauge 300kN stress testing machine measurement calibration standard force 600kN

Description :

0.1 level standard force measuring instrument 300kN stress testing machine metrological calibration standard force measuring 600kN Product introduction and explanationThe company currently has various types of weighing sensors and force sensors. The main products include 10 series, more than 300 varieties, specifications, ranges, microstructures, tensile and compressive structures, S-shaped structures, spoke structures, column structures, corrugated tube structures, cantilever beam structures, single point structures, box structures, bridge structures, and weighing modules. The weighing range of a single sensor ranges from as small as 50 grams to as large as 3000 tons, and there are analog and digital sensors suitable for various harsh environments such as aluminum alloy, alloy steel, stainless steel, explosion-proof, and high-temperature types. The product is widely used in various fields such as chemical engineering, mining, oil fields, automobiles, lifting machinery, construction, building materials, mechanical processing, thermal power, transportation, etc.

0.1 level standard force gauge 300kN stress testing machine measurement calibration standard force 600kN：

　　1.2 Placement time

　　The force measuring instrument should be placed for a sufficient period of time under the calibration conditions to ensure that the temperature is the same as and hidden under the calibration conditions. The recommended placement time for the force gauge is not less than 8 hours.

　　During the verification process, there should be no vibration, impact, electromagnetic field, or other interference sources around that could affect the verification results

　　1.4 Preheating

　　Verify that the corresponding variable force measuring instrument (or other force measuring instruments with power supply system) is powered on and preheated. The preheating time should comply with the manufacturer's regulations.

　　Note: The manufacturer does not specify the preheating time for the force gauge, which is generally preheated for 30 minutes to 1 hour.

　　1.5 Loading conditions

　　The installation of the force measuring instrument should ensure that its main axis coincides with the loading axis of the force base (standard) machine.

　　1.5.2 Compression force gauges should generally be equipped with upper and lower pressure pads. The supporting surface and bottom surface of the force measuring instrument should be flat and free from rust, scratches, and debris.

　　1.5.3 Suitable connectors should be used at both ends of the tensile force measuring instrument, and the connectors should ensure that the force base (standard) machine can safely apply axial force to the force measuring instrument.

　　1.6 Verification equipment

　　The principle of expanding the uncertainty of the force value of the force base (standard) machine or loading device for verifying various levels of standard force measuring instruments is three times the long-term stability or indication error index of the tested force instrument.

　　Shenzhen Youzhongli Technology Co., Ltd. adheres to the business philosophy of "specializing in sensors and doing well in sensors", supplying various weighing sensors and ingredient control systems to provide you with cost-effective products;

　　The company has hundreds of models of various weighing sensors and force sensors, various intelligent application instruments and systems, as well as various overload protection devices for lifting machinery. The product is widely used in fields such as chemical engineering, mining, oil fields, automobiles, lifting machinery, construction, building materials, mechanical processing, thermal power, and transportation.

AfterSalesService :

• 0.1 level standard force gauge 300kN