HM-8-402 weighing module 500kg-10t weighing sensor
Category:
electron/Sensors, sensitive components/Pressure sensor
Model:
HM-8-402-0.5t
Brand:
Youzhongli
model:
HM-8-402-0.5t
output signal:
Simulated type
Physical properties of materials:
semiconductor
Material crystal structure:
single crystal
material:
ceramics
pressure type:
Negative pressure sensor
Processing & Customization:
No
margin of error:
zero point zero zero three
accuracy:
C3
Operating Temperature:
-30+70
insulation resistance:
five thousand
load impedance:
five thousand
permitted Overload :
one hundred and fifty
response time:
zero point zero two
stability:
zero point zero three
sensitivity:
two
linearity:
zero point zero two
hysteresis:
zero point zero two
Is it imported:
No
quantity:
nine hundred and ninety-nine
encapsulation:
Glue seal
QQ:
two billion forty-three million one hundred and eight thousand five hundred and twenty
manufacturer:
Shenzhen Youzhongli Technology Co., Ltd
Retail Price
210.00USD
重量
kg
- Product Description
-
model HM-8-402-0.5t
output signal Simulated type
Physical properties of materials semiconductor
Material crystal structure single crystal
material ceramics
pressure type Negative pressure sensor
Processing & Customization No
margin of error zero point zero zero three
accuracy C3
Operating Temperature -30+70
insulation resistance five thousand
load impedance five thousand
permitted Overload one hundred and fifty
response time zero point zero two
stability zero point zero three
sensitivity two
linearity zero point zero two
hysteresis zero point zero two
Is it imported No
quantity nine hundred and ninety-nine
encapsulation Glue seal
QQ two billion forty-three million one hundred and eight thousand five hundred and twenty
manufacturer Shenzhen Youzhongli Technology Co., Ltd
Description :
Product Introduction of HM-8-402 Weighing Module 500kg-10t Weighing SensorShenzhen Youzhongli Technology Co., Ltd. requires more weighing and force sensors with rated loads ranging from 0.1kg to 3000t and 1N to 30000KN (all ranges are available and customization is acceptable);
HM-8-402 weighing module 500kg-10t weighing sensor：
HM-8-402-0.5t、HM-8-402-1.0t、HM-8-402-2.0t、HM-8-402-2.5t、HM-8-402-3.0t、HM-8-402-5.0t、HM-8-402-7.5t、HM-8-402-10t、
HM-8-425-1t、 HM-8-425-2t、 HM-8-425-2.5t、 HM-8-425-3t、 HM-8-425-5t、 HM-8-425-7.5t、 HM-8-425-10t、 HM-8-425-15t、 HM-8-425-20t、 HM-8-425-25t、
Description of the dedicated weighing module for the material tank:
Generally speaking, the weighing system of the material tank collects the weight of the tank by using weighing and batching modules on the legs of the tank. The tank is equipped with several weighing and batching modules based on the number of legs it has. Then, the data from multiple weighing and batching modules is transmitted to the instrument through a multi input single output junction box. The instrument can display the weight of the entire system in real-time. A switch module can also be added to the instrument to control the feeding motor of the material tank through relay switches. Alternatively, the instrument can provide RS485, RS232, or analog signals to transmit the weight information of the material tank to control devices such as PLC, which can then perform more complex control.
Installation precautions
Pay attention to horizontal adjustment, including the installation plane of individual modules and the horizontal adjustment between a set of weighing modules.
The sensor cannot pass current during welding. When welding the top plate, the ground wire should be connected to the scale body. When welding the bottom plate, the ground wire should be connected to the foundation to prevent damage to the sensor.
If there is a material conveying pipeline on the scale body, it should be replaced with a hose or the connecting pipeline should be made as long as possible to prevent them from eating up the actual load of the sensor and causing errors.
To weld a weight calibration table on the container for calibration purposes. There is usually no place to place weights on the container, and a platform needs to be welded to place the weights. Usually welded under the container for easy placement of weights up and down.
The junction box must be moisture-proof, and any excess holes should be plugged with sealed plugs. If the junction box is installed outdoors, a protective box must be added to prevent rain. Malfunctions caused by moisture in the junction box during use often occur, so it must be given sufficient attention.
AfterSalesService :
Key words:- HM-8-402 weighing module
