Yunnan SB type grain silo tank weighing sensor 750kg cantilever beam weighing sensor

Description :

Yunnan SB type grain silo tank weighing sensor 750kg cantilever beam weighing sensor product introductionThe company mainly produces and sells weighing sensors and force sensors. Various customized non-standard sensors, large tonnage force sensors, column type load sensors with a large range of 10 to 2000 tons, spoke type load sensors with a tensile and compressive force of 1 to 1000 tons, cylinder type load sensors with a tensile and compressive force of 100 to 500 tons, matched with high-precision standard force measuring instruments, and specialized digital displays for force measurement with 1 to 20 channels. Welcome to inquire by phone

　　Yunnan SB type grain silo tank weighing sensor 750kg cantilever beam weighing sensor:

　　H8C-C3-500kg-4B，H8C-C3-1.0t-4B，H8C-C3-1.5t-4B，H8C-C3-2.0t-4B，H8C-C3-2.5t-6B，H8C-C3-3.0t-6B，H8C-C3-5.0t-6B，H8C-C3-10t-6B，

　　H8C-C3-500kg-4B6，H8C-C3-1.0t-4B6，H8C-C3-1.5t-4B6，H8C-C3-1.0T-4B6,H8C-C3-2.0t-4B6，H8C-C3-2.5t-6B6，H8C-C3-3.0t-6B6，H8C-C3-5.0t-6B6，H8C-C3-10t-6B6，

　　H8C-C3-500kg-4B-C，H8C-C3-1.0t-4B-C，H8C-C3-1.5t-4B-C，H8C-C3-1.0T-4B-C,H8C-C3-2.0t-4B-C，H8C-C3-2.5t-6B-C，H8C-C3-3.0t-6B-C，H8C-C3-5.0t-6B-C，H8C-C3-10t-6B-C，

　　Although the weighing sensor has a certain overload capacity, it should still be prevented from overloading during the installation of the weighing system. It should be noted that even short-term overloading may cause sensor damage. During the installation process, if necessary, a pad of the same height as the sensor can be used to replace the sensor first, and then the sensor can be replaced. During normal operation, sensors should generally be equipped with mechanical structural components for overload protection. If a screw is used to fix the sensor, a certain tightening torque is required, and the screw should have a certain depth of thread insertion. Generally speaking, fixed screws use high-strength screws.

　　5. Try to use structural components with automatic positioning (reset) function, such as spherical bearings, joint bearings, positioning fasteners, etc. They can prevent certain lateral forces from acting on the sensor. It should be noted that some lateral forces are not caused by mechanical installation, such as lateral forces caused by thermal expansion, lateral forces caused by wind, and lateral forces caused by vibration of agitators on certain container scales, which are not caused by mechanical installation. Some accessories on certain scales must be connected to the scale body (such as the feeding pipeline of container scales). We should make them as soft as possible in the direction of the sensor loading spindle to prevent them from "eating" the true load of the sensor and causing errors.

　　6. Handle with care, especially for small capacity sensors made of alloy aluminum elastomers. Any impact or drop may cause significant damage to their measuring performance. For high-capacity weighing sensors, they generally have a large self weight, so it is required to use appropriate lifting equipment (such as chain hoists, electric hoists, etc.) as much as possible during transportation and installation. The mounting surface of the sensor base should be flat, clean, and free of any oil film, adhesive film, etc. The installation base itself should have sufficient strength and rigidity, generally requiring higher strength and rigidity than the sensor itself.

AfterSalesService :

• 750kg cantilever beam weighing sensor