650 ton force sensor, spoke type 6500kN standard force gauge, level 0.3

Description :

650 ton force sensor spoke 6500kN standard force gauge 0.3 level product features：

　　A standard force gauge is a highly accurate and reliable force (torque) measurement instrument. After years of improvement, this instrument can be applied in fields such as force (or torque) measurement, weighing control, sensor adjustment and detection, material performance testing, stress-strain measurement, transient peak measurement, etc. It has the advantages of high reliability and stability, complete functions, high measurement accuracy, convenient use, and intuitive display. It is the most ideal tool for measurement technology institutions to transmit, verify, calibrate, and perform performance testing of force, quality, hardness, etc.

　　The usage method of standard force measuring instruments is particularly important. Improper operation may affect the service life of the force measuring instrument and cause damage to the instrument. We hope the following methods can be helpful to you.

　　1. It is made according to the principle that the greater the tension applied to the spring, the longer the spring will elongate;

　　2. Observe smaller scale values: What N does each small grid of the spring scale represent;

　　3. Observation range: Observe the larger scale value on the spring scale panel, and be careful not to apply force beyond its range;

　　4. Apply tension along the central axis of the spring on the spring scale;

　　5. Zero point calibration: Check if the pointer is pointing to the zero position. If not, adjust it to the zero mark;

　　Before use, gently pull the spring a few times to avoid it getting stuck;

　　7. Observe that the pointer reading line is perpendicular to the scale line;

　　Before measurement, the spring should naturally sag and check if the pointer is aligned with the zero mark;

　　9. The measured force cannot exceed its measurement range;

　　10. The reading must be read in a stationary state.

　　The standard force measuring instrument is mainly used in aerospace, shipbuilding, metrology schools and other fields where high precision and stability are required for the measured products. The instrument has a 4.3-inch TFT color LCD display, which is more intuitive and can automatically calculate the measurement results. At the same time, it comes with a lithium battery power supply, and the instrument comes with environmental temperature and humidity measurement; It can store 100 sets of measurement data, and the stored data can be queried and deleted; Equipped with simulation calibration and calibration data recovery and transplantation functions, coupled with RS-232 interface, it can transmit measurement data to a computer.

650 ton force sensor spoke 6500kN standard force gauge 0.3 level picture：

　　JJF1469-2014 (Calibration Specification for Strain Gauge Sensor Measuring Instruments), JJG144-2007 (Verification Regulations for Standard Force Measuring Instruments),

　　JJG557-2011 (Standard Torque Meter Verification Regulations), JJG391-2009 (Load Sensor Verification Regulations),

　　OIML-R60 (GUO International Legal Metrology Organization Technical Standard for Weighing Sensors)

　　The NIM-ZY-LS-CL-035 standard load measuring instrument testing/calibration rules, registered with the China Institute of Metrology, are the preliminary technical standards based on which the current dynamometer indicator instrument testing/calibration is carried out. They have been replaced by the JJF1469-2014 standard.

AfterSalesService :

• 650 ton force sensor spoke type