FWQB pneumatic submersible pump with large flow rate FWQB30-70 mining submersible pump

Description :

　　fwqbPneumatic submersible pump, fwqb30-70 mining submersible pump, pneumatic sand and sewage submersible pump

　　We doFWQB Pneumatic Submersible PumpThe philosophy is to meet your requirements, be honest and meticulous in doing things. shapeFWQB Pneumatic Submersible PumpProducts keep the corporate culture alive and thriving.Fwqb30-70 mining submersible pumpLong lifespan, few vulnerable parts, easy to maintain. Let me introduce it to you below.

　　fwqbPneumatic submersible pumpDetailed introduction:

　　fwqb30-70Mining submersible pumpBeautiful appearance, small size, light weight, high flow rate, the overcurrent part adopts a downward suction structure, the impeller is semi open, and ZL107 material is used. It can pass particles ≤ 14mm and has strong sewage discharge capacity. It will not be blocked by the suction surface of small solid particles or fibers, nor will it be damaged prematurely due to the inhalation of abrasive media. Especially after our company's technical personnel re selected the blade material and recalculated its strength and thickness according to domestic and foreign theories, the bending and twisting strength of the blade has been improved; And special processing has been carried out on the new blades to make them wear-resistant and durable. The wear resistance of the blades is dozens of times higher than that of the original laminated wood blades, greatly reducing the frequency of maintenance, replacement of blades and cylinders, and improving the work efficiency of users.

　　fwqbPneumatic submersible pumpIts characteristics:

　　1Fwqb30-70 mining submersible pumpLow noise, kept within 40 decibels;

　　2Fwqb30-70 mining submersible pumpLow air consumption and high efficiency;

　　3Fwqb30-70 mining submersible pumpSmall size; Lightweight, compact structure, easy to move;

　　4Fwqb30-70 mining submersible pumpLong service life, few vulnerable parts, easy to maintain.

　　fwqbPneumatic submersible pumpInstructions for Use:

　　1Fwqb30-70 mining submersible pumpBefore use, a trial run must be conducted on the ground. When operating on the ground, the air pressure should be controlled within 0.2Mpa, and the pump test time should not be too long to avoid long-term high-speed operation, accelerate component wear, and reduce service life.

　　2FWQB Pneumatic Submersible PumpThe inner diameter of the intake pipe shall not be less than 25 millimeters, and the inner diameter of the FQW type intake pipe shall not be less than 17 millimeters. The working pressure shall not be lower than 0.4 MPa, otherwise it will affect normal operation;

　　3. The exhaust pipe should be exposed above the water surface and should not be allowed to enter water or other impurities, in order to prevent rusting of internal parts of the cylinder or jamming of the impeller and rotor.

　　When installing the intake pipe, it is necessary to first blow away any impurities inside the pipe and at the joints to ensure that the intake is dry and clean, in order to prevent impurities from entering and causing component wear or rotor jamming that prevents operation.

　　4. The water wheel nut must be equipped with a spring washer to prevent the rotor from reversing and loosening during water return, causing the impeller to sink and friction with the pump body.

　　5. During the assembly and disassembly process of replacing vulnerable parts such as impellers, turbines, and seals, heavy hammers should not be used to strike, in order to avoid damaging the fitting accuracy of internal components. Generally, after about fifteen consecutive days of use, the air pump should be turned on and cleaned once for maintenance and upkeep.

　　6FWQB Pneumatic Submersible PumpIt can be used in turbid water with a high content of rock powder and sediment, and can pass particles with a diameter of ≤ 10mm without being blocked by the inhalation of small solid particles or fibers, nor will it be prematurely damaged by the inhalation of abrasive media.

　　7. When installing the intake pipe, it is necessary to first blow away any impurities inside the pipe and at the joints to ensure that the intake is dry and clean, in order to prevent impurities from entering and causing component wear or rotor jamming that prevents operation.

　　fwqbPneumatic submersible pumpTerms of Use

　　one fwqb30-70Mining submersible pumpWhen diving underwater, the water surface should not exceed the end face of the connection between the muffler and the shell;

　　2. The compressed air used for power should be able to meet the requirements of its wind pressure and air volume;

　　3 Applicable pressure range: 0.4MPa-0.7MPa

　　four fwqbPneumatic submersible pumpThe pH of the conveying medium is within the range of 6-8;

　　5. Solid particles with a diameter not exceeding 10mm and a volume concentration not exceeding 2%;

　　The temperature of the conveying medium shall not exceed 40 ℃;

　　7. Working environment temperature (5-40) ℃;

　　Today's matter will not be postponed to tomorrow, if you make a purchaseFWQB Pneumatic Submersible PumpWill it be sent to you tomorrow without delaying your usage time,FWQB Pneumatic Submersible PumpPlease identify Hongyi.

AfterSalesService :

• FWQB Pneumatic Submersible Pump