BQG350/0.2 Mining Pneumatic Diaphragm Pump Smooth Aluminum Alloy BQG-350/0.2 Pneumatic Diaphragm Pump

Description :

　　BQG350/0.2Mining pneumatic diaphragm pump smooth aluminum alloy BQG-350/0.2 pneumatic diaphragm pump

　　Hongyi Technology has a great landscape,Mining pneumatic diaphragm pumpStrictly control and work together to ensure quality, making it easy to use and transport.Working principle of BQG-350/0.2 mining pneumatic diaphragm pumpIt's simple, using compressed air commonly used in industrial and mining enterprises as a power source, and utilizing the pressure difference in the air chamber to ensure liquid flow.

　　1、 BQG350/0.2 Mining Pneumatic Diaphragm PumpModel Description Model: BQG-350/0.2

　　B represents pump, Q represents pneumatic, G represents diaphragm, 350 represents calibrated flow rate of 350 liters per minute, and 0.2 represents discharge pressure of 0.2 megapascals under calibrated operating conditions.

　　2、 BQG350/0.2 Mining Pneumatic Diaphragm PumpProduct Features:

　　1. Due to the use of air as a power source, the flow rate automatically adjusts with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of a centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it needs to be matched with a reducer or frequency converter, which greatly increases the cost. The same applies to gear pumps.

　　2. Using pneumatic pumps in flammable and explosive environments is reliable and cost-effective because: firstly, sparks cannot be generated after grounding; Secondly, there is no heat generated during work, and the machine will not overheat; Thirdly, the fluid will not overheat because the diaphragm pump has less agitation on the fluid.

　　3. In harsh areas of construction sites, such as construction sites and industrial and mining wastewater discharge, due to the high impurities and complex composition in the sewage, the pipelines are prone to blockage, which leads to excessive load on the electric pump and makes the motor vulnerable to heating.Mining pneumatic diaphragm pumpIt can be passed through particles and the flow rate can be adjusted. When the pipeline is blocked, it will automatically stop until it is unobstructed.

　　4. In addition, the diaphragm pump has a small volume, is easy to move, does not require a foundation, occupies a very small area, and is easy and economical to install. Can be used as a mobile material conveying pump.

　　3、 BQG350/0.2 Mining Pneumatic Diaphragm PumpIt is a new type of pneumatic product independently innovated and developed by our company, and the technology has reached a very high level. The pump features a dead center free, anti stall design, and modular pneumatic pump body/fluid section, effectively solving technical problems such as the valve core components of the original diaphragm pump not moving properly.

　　4、 BQG350/0.2 Mining Pneumatic Diaphragm PumpWorking environment conditions

　　1. Solid particles with a larger diameter not exceeding 6-9mm and a volume concentration not exceeding 2%;

　　2. Environmental temperature: -20 ℃ to 50 ℃;

　　3. Environmental humidity: ≤ 95% (when the ambient temperature is+25 ℃);

　　4. The compressed air used for power should have a pressure range of 0.2-0.7 Mpa;

　　5. The temperature of the conveying medium shall not exceed 40 ℃;

　　6. The pH of the conveying medium is within the range of 4-10;

　　7. Atmospheric pressure: 80kPa to 106kPa;

　　BQG350/0.2Mining pneumatic diaphragm pumpFollow safety regulations to use life ties and understandThe working principle of BQG-350/0.2 pneumatic diaphragm pump for coal mines,Consciously complying with safety regulations is a guarantee.

AfterSalesService :

• Mining pneumatic diaphragm pump