BQG150/0.2 Pneumatic Diaphragm Pump Wear resistant BQG-150/0.2 Coal Mine Pneumatic Diaphragm Pump for Mud Extraction
BQG150/0.2 Pneumatic Diaphragm Pump Wear resistant BQG-150/0.2 Coal Mine Pneumatic Diaphragm Pump for Mud Extraction

BQG150/0.2 Pneumatic Diaphragm Pump Wear resistant BQG-150/0.2 Coal Mine Pneumatic Diaphragm Pump for Mud Extraction

Category:

chemical industry/pump/Diaphragm pump

Model:

BQG150/0.2

Brand:

Tai'an Hongyi

Retail Price

550.00USD


重量

kg

  • Product Description
  • Description :

      

      BQG150/0.2Pneumatic diaphragm pump wear-resistant BQG-150/0.2 coal mine pneumatic diaphragm pump for mud pumping

      Bet on each other and win once, select the liquid on-site for pumpingBQG150/0.2 Pneumatic Diaphragm PumpIt is a standard to test your bet, betting on the enterprise to win N times,Selection of BQG-150/0.2 Pneumatic Diaphragm Pump Models for Coal MinesIf you are not satisfied, then Hongyi Technology has more models for you to choose from, and I should be one of your many choices to stand out.

      1、 BQG150/0.2 Pneumatic Diaphragm PumpModel Description Model: BQG-150/0.2

      B represents pump, Q represents pneumatic, G represents diaphragm, 150 represents calibrated flow rate of 150 liters per minute, and 0.2 represents discharge pressure of 0.2 megapascals under calibrated operating conditions.

      2、 BQG150/0.2 Pneumatic Diaphragm PumpParameter introduction:

      Inlet pressure 0.83MPa

      Feed pressure 0.069MPa

      Discharge pressure 0.83MPa

      Flow rate 340 liters per minute

      Particle size 6.4 millimeters

      Temperature -40 ℃~107 ℃

      BQG-150/0.2Pneumatic diaphragm pump for coal minesCalibrated operating condition flow rate of 150 liters per minute

      Calibration condition discharge pressure 0.2 MPa

      Displacement/Cycle 2.42 liters

      Installation dimensions are shown in the attached diagram

      Noise level 78 decibels

      3、 BQG150/0.2 Pneumatic Diaphragm PumpProduct advantages:

      1. Spacious flow and good performance. It allows for the passage of large particles with a diameter of up to 10mm. When pumping mud and impurities, there is minimal wear on the pump;

      2. The head and flow can be infinitely adjusted through the opening of the air valve (the air pressure can be adjusted between 1-7 bar):

      3. The pump has no rotating parts, no shaft seal, and the medium pumped by the diaphragm pump is completely separated from the moving parts and workpiece medium of the pump, so the conveyed medium will not leak outward. So when pumping toxic, easily reactive or corrosive media, it will not cause environmental pollution and endanger personal safety;

      4. No need for electricity. It is safe and reliable to use in flammable and explosive places;

      4、 BQG150/0.2 Pneumatic Diaphragm PumpIf the model selection is not suitable, you can refer to the following other models:

      Most people want to transform this world,BQG150/0.2 Pneumatic Diaphragm PumpThe choice is a tool for you to transform the world, but few people want to transform themselves,Selection of BQG-150/0.2 Pneumatic Diaphragm Pump Models for Coal MinesIf it is not suitable, you can change your thinking. Hongyi Xiaozhang will give you suitable advice on the selection of pneumatic diaphragm pumps.

    AfterSalesService :

    Key words:
    • pneumatic diaphragm pump