Selection of FQW20-50/W Mine Pneumatic Submersible Pump FQW30-50/W Pneumatic Water Pump for Underground Sewage and Sand Discharge

Description :

　　Selection of FQW20-50/W Mine Pneumatic Submersible Pump FQW30-50/W Pneumatic Water Pump for Underground Sewage and Sand Discharge

　　withFQW20-50/W Mining Pneumatic Submersible PumpThe customer feedback is like a mirror, showing that the person is right and the clothes are right; For customer useFQW30-50/W pneumatic water pump has high efficiency and peace of mindWe take pride in the praise and recognition, and promote the development of enterprises, factories, and markets.

　　1FQW20-50/W Mining Pneumatic Submersible PumpIt mainly consists of three parts: pump body, air motor, and overcurrent,

　　Pump body part: divided into upper and lower chambers, with a sealing ring separating air and water in the middle. The sealing ring adopts spring sealing and utilizes the pressure of air and water to allow high-pressure air and water to enter the inner walls of the upper and lower sealing rings respectively, causing them to expand internally and enhancing the sealing effect.

　　Pneumatic motor part: composed of rotor, turbine, bearings, etc. Powered by compressed air, the impact turbine drives the rotor to operate at high speed and perform work.

　　FQW30-50/WPneumatic water pumpOverflow section: composed of water turbine, pump cover, suction port, pump seat, etc. The water wheel is installed on the rotor shaft in the lower chamber of the shell, and compressed air is sent in from the inlet. The rotor runs to drive the water wheel, and the water in the water wheel is pressed into the outlet vortex of the shell under the action of centrifugal force, and discharged along the outlet pipe.

　　IIFQW20-50/W mining pneumatic submersible pump has high efficiency and is worry freeWhere does it manifest specifically? The impeller adopts a special design with strong drainage capacity, which will not be blocked by the inhalation of solid particles or fibers, nor will it be prematurely damaged by the inhalation of particulate media. The overall structure is simple, and it is easy to move, disassemble, and maintain. It has the advantages of high efficiency, good performance, and low air consumption.

　　IIIFQW20-50/W Mining Pneumatic Submersible PumpLet me briefly explain the meanings of each parameter:

　　Model: FQW20-50/W

　　FQ - Mining Pneumatic Submersible Pump

　　W - Transport medium code: sewage

　　20- Rated flow rate: 25m3/h

　　50- Rated head: 50m

　　W - Characteristic code for water turbine type

　　FQW20-50/WMining pneumatic submersible pumpA solid-liquid two-phase medium pumping equipment that uses compressed air as the power source, mine wastewater containing pollutants and solid particles as the transport object, and operates in a submersible manner (except for the exhaust pipe exposed to the water surface, some pump bodies including the inlet, pump seat, and pump cover need to be submerged in water). It can also transport clean water.

　　4FQW20-50/W Mining Pneumatic Submersible PumpUsage environment and attention requirements:

　　1FQW30-50/W pneumatic water pumpWorking environment temperature (2~40) ℃;

　　2. The pH of the conveying medium is within the range of 4-10;

　　3. The diameter of the sewage pump containing solid particles shall not exceed 10mm, and its volume concentration shall not exceed 2%;

　　4. The pump power uses compressed air with a pressure range of (0.45~0.70) MPa and can meet the air consumption requirements.

　　FQW20-50/WMining pneumatic submersible pumpIt's about simplifying complex problems, planning chaotic things, and makingFQW30-50/W pneumatic water pumpEfficient and worry free, allowing users to manage less, but using it well.

AfterSalesService :

• Mining pneumatic submersible pump