BQF15-16 Pneumatic Submersible Pump for Small and Lightweight Coal Mine Pumping, FQW8-20 Pneumatic Pump

Description :

　　BQF15-16Pneumatic submersible pump FQW8-20 for small and lightweight coal mine pumping and pneumatic sewage discharge

　　customer useBQF15-16 Pneumatic Submersible Pump Small and LightweightIt went smoothly, we didn't have any false joy; The customer wants to knowBQF15-16 Pneumatic Submersible PumpWe are not discouraged by the instructions and principles used, and we can patiently and thoroughly answer your questions; Our customers consistently purchase our products safely and steadilyFQW8-20 Pneumatic Submersible PumpWe are not extravagant; The market competition is fierce, and we are not afraid.

　　First of all, let me declare that this information is just a brief introduction to one of our many types of pneumatic submersible pumps, which is a small air pump:BQF15-16 Pneumatic Submersible PumpThe flow rate is 15 cubic meters per hour and the lift is 16 meters; Our factory produces and sells various specifications and models of pneumatic submersible pumps.

　　Take a lookBQF15-16 Pneumatic Submersible PumpInstructions and principles for use:

　　1. The pump consists of three parts: pump body, air motor, and overcurrent.

　　2. Wind motor part: composed of rotor, blades, upper and lower end covers, cylinder, bearings, etc.

　　3. Working principle: Using compressed air as the power source, the compressed air enters the turbine chamber through the inlet duct and nozzle, driving the turbine to rotate, thereby driving the pump shaft to rotate with the water wheel for drainage work.

　　4FQW8-20 Pneumatic Submersible PumpIf the gas supply pressure is greater than 3.5KG/CM2, it can work, but the air pressure must not exceed 8KG/CM2.

　　5. When the water depth exceeds the height of the pump, a 60mm inner diameter rubber hose should be connected to the exhaust port to divert the remaining air out of the water surface for discharge. Water and other impurities should be prevented from entering the exhaust pipe.

　　6. Pay attention to the cleanliness of the air source to prevent debris and dirt from entering the air duct. During work, attention should be paid to removing sediment, coal slag, and debris accumulated outside the pump seat to avoid reducing the efficiency of the pump.

　　Performing countercyclical operations is necessary to obtain different benefits, which requires reverse thinking. someBQF15-16 Pneumatic Submersible PumpThe price is so cheap that you can't believe it, so you need to consider if there are any particular considerations here.BQF15-16 Pneumatic Submersible PumpHave you roughly understood the instructions and principles for use? If someone just says a few words and you go buy, or if someone deceives you a few words and you believe them, then your business may only gain or even very low benefits and cannot achieve extraordinary development. So there is a saying that excellent companies need to plan for bad times when they are good, and make good arrangements when they are bad. Have you arranged to contact me?! Hongyi Xiaozhang is dedicated to serving you 24 hours a day!

AfterSalesService :

• Pneumatic submersible pump