FQW15-100/K Mining Pneumatic Submersible Pump High Head FQW20-90/K Mining Pneumatic Water Pump Manual

Description :

　　FQW15-100/KMining Pneumatic Submersible Pump High Head FQW20-90/K Mining Pneumatic Water Pump Manual

　　The real economy is the foundation of the economy,FQW15-100/K Mine Pneumatic Submersible PumpQuality is the foundation of our air pump enterprise, and we particularly need to create market space and support a large number of competitive onesFQW20-90/K Mine Pneumatic Water PumpOccupying the market is an important support for the stability of enterprises.Picture and price of mining pneumatic water pumpI have everything here. If you need anything, feel free to come to me. Hongyi Xiaozhang knows everything and will keep talking until he helps you solve the problem.

　　FQW15-100/KMining pneumatic submersible pumpThat is to say, the mining pneumatic submersible pump is mainly used for underground drainage in coal mines. There are turbine type pneumatic pumps and blade type pumps. Our blade type requires oil injection for drainagePneumatic water pumpIt consists of five parts: pneumatic motor, water pump, oil mist device, pipe joint, and muffler. The model is FQW25-70; FQW50-25； FQW70-30； QYW25-50； FWQB30-70； BQF16-15 and other models have been derived based on different flow rates and head, resulting in more specifications and models. Of course, the models are different,Picture and price of mining pneumatic water pumpIt's also different. As the saying goes, if you need it, find Hongyi Xiaozhang to save money and worry.

　　Popularize for new and old customers hereFQW15-100/K Mine Pneumatic Submersible PumpUsage and maintenance:

　　1FQW20-90/K Mine Pneumatic Water PumpIf the gas supply pressure is greater than 3.5KG/CM2, it can work, but the air pressure must not exceed 8KG/CM2.

　　2. When the water depth exceeds the height of the pump, a 60mm inner diameter rubber hose should be connected to the exhaust port to divert the remaining air out of the water surface for discharge. Water and other impurities should be prevented from entering the exhaust pipe.

　　3. Pay attention to the cleanliness of the air source to prevent debris and dirt from entering the air duct of the submersible pump. During work, attention should be paid to removing sediment, coal slag, and debris accumulated outside the pump seat to avoid reducing the efficiency of the pump.

　　4FQW20-90/K Mine Pneumatic Water PumpWhen in use, connect the 25mm inner diameter air inlet cloth rubber tube, and the working pressure should not be lower than 0.3 megapascals. Test run on the ground for three minutes to check whether the startup is flexible and normal. After turning off the air, connect the 38mm inner diameter water pipe at the outlet and put it into the water to open the air and drain.

　　needFQW15-100/K Mine Pneumatic Submersible PumpIf you like to take risks and try to buy some inferior products, you can contact me before taking the risk. We can discuss and exchange ideas. I believe that through my knowledge and answers, you will give up the adventure of buying inferior products. Okay, if you're seeingFQW15-100/K Mine Pneumatic Submersible Pump with High HeadIf this title comes in, then you can call me and start our cooperation.

AfterSalesService :

• Mining pneumatic submersible pump