J3G4-400 profile cutting machine has high work efficiency and 4kw profile cutting machine with good safety performance

Description :

　　J3G4-400 profile cutting machineHigh work efficiency 4kw profile cutting machine with good safety performance

　　Produced by Tai'an HongyiJ3G4-400 profile cutting machineIt consists of a series excited motor, transmission mechanism, shield frame, base, and rotatable clamp. Single phase AC motors are divided into single insulation profile cutting machines and double insulation cutting machines with hidden saw blades based on the presence or absence of additional insulation between the stator, rotor, and ground Low noise High security 4kw profile cutting machineWidely used economically, we have a technical team to solve the problems you encounter during use.

　　1J1G-400 profile cutting machineStructural features:

　　The J1G-400 profile cutting machine consists of a series excited motor, transmission mechanism, shield frame, base, and rotatable clamp. Single phase AC motors are divided into single insulation profile cutting machines and double insulation cutting machines based on the presence or absence of additional insulation between the stator, rotor, and ground.

　　The parallel grinding wheel used in the J1G-400 profile cutting machine is a fiber-reinforced resin thin film grinding wheel with a diameter not exceeding 406mm and a rated linear speed not exceeding 80m/s. The angle between the clamping jaws of the workpiece and the grinding wheel shaft can be adjusted freely from 0 to 45 degrees on the left and right, and some products can be adjusted freely from 0 to 30 degrees on the right position.

　　IIJ1G-400 profile cutting machineCutting machine parameters:

　　Product Name: Profile Cutting Machine

　　Product model: J3G-400

　　Motor power/2.2kw

　　Rated voltage/380V

　　Rated frequency/50Hz

　　Idle speed/3000r/min

　　Grinding wheel specification/400 × 3 × 32mm

　　Gross weight: 63kg

　　Packaging size: 670 × 470 × 470mm

　　IIIJ1G-400 profile cutting machineThere are three types based on power, which are as follows:

　　J3G4-400 2.2KW 380V

　　J3G4-400 3.0KW 380V

　　J3G4-400 4.0KW 380V

　　4J1G-400 profile cutting machineIntroduction:

　　Profile cutting machine, also known as grinding wheel saw, is suitable for departments such as construction, hardware, petrochemicals, mechanical metallurgy, and water and electricity installation. A profile cutting machine is a commonly used equipment that can cut materials such as metal square flat pipes, square flat steel, I-beams, groove steel, carbon element steel, and element pipes.

　　The profile cutting machine has been improved by our technical personnel. This cutting machine has the characteristics of strong universality, easy mobile operation, simple and practical functions, and high cost-effectiveness. It has received unanimous praise from customers. Our technical team serves everyone and we look forward to your call for consultation.

AfterSalesService :

• 400 profile cutting machine