MDS-35 torque multiplier is lightweight and convenient. Torque wrench manufacturer direct sales

Description :

　　MDS-35 torque multiplierLightweight and convenient torque wrench

　　The MDS-35 torque multiplier produced by our company is a device that can increase torque for operators. Due to the fact that the output power does not exceed the input power, the output rotation speed is lower than the input rotation speed. To impress customers with integrity and win hearts with quality, this torque amplifier is suitable for construction occasions where nuts are disassembled and installed in small spaces,Torque wrench manufacturerLightweight and convenient manual operation. Interchangeable sleeves of different specifications, suitable for various large diameter bolts and nuts. This torque amplifier tool has a diameter, torque output, product series design, and a wider range of applications. Welcome to call for consultation. Below, I will introduce it to everyone

　　1MDS-35 torque multiplierAdvantages of rebound device:

　　1. The rebound device, combined with the reaction force point of the multiplier's reaction arm, can tighten the nut of the multiplier, even if the torque multiplier is used upside down, it can still support the weight of the torque multiplier itself.

　　2. Without a rebound device, it is often necessary to confirm that there are no obstacles during the 360 degree rotation of the torque device, as obstacles can cause the multiplier to be unusable;

　　If the MDS-55 torque multiplier accidentally loosens, the torque input device will not suddenly rebound in the direction of operation, ensuring the safety of the operator;

　　IIMDS-35 torque multiplierInstructions for use

　　When using the MDS-55 torque multiplier, please pay attention to the torque value of the torque wrench used and do not overload it. Try to keep the torque wrench drive head, torque multiplier, and locked object aligned along the same axis. Try to maintain a reliable planar contact between the reaction force arm and the resisting object. Try to maintain a right angle between the reaction force and the reaction force arm. The reaction force point should be as far away from the torque multiplier as possible and within the safety triangle zone. For safety reasons, the use of dual arms or balanced reaction force arms is not allowed. To remove the torque multiplier, first remove the torque wrench and toggle the rebound device, avoiding tapping.

　　IIIMDS-35 torque multiplierInstallation method

　　During installation, please do not use the actuator part of the valve as a lifting point to avoid damaging the actuator and accessories.

　　2. This type of valve should be installed in the horizontal or vertical direction of the pipeline.

　　3. The pipeline near the installation point of MDS-55 torque multiplier should not be lowered or subjected to external forces. Pipeline brackets or supports can be used to eliminate pipeline deviation.

　　4. Remove the protective covers on both sides of the flange end and rinse and clean with the valve fully open.

　　Before installation, the entire machine should be tested according to the specified signal (electric or gas) to prevent vibration from affecting performance during transportation. Only after passing the test can it be installed online (wiring should follow the electric actuator circuit diagram).

　　Before connecting the MDS-55 torque multiplier to the pipeline, it is necessary to flush and remove any remaining impurities in the pipeline (which may damage the valve seat and ball).

　　7. After connecting to the pipeline, please cross tighten the flange connection bolts with the specified torque.

AfterSalesService :

• Torque multiplier