Manual switch manufacturer directly supplies coal mine manual switch for flexible use
Category:
Transportation/Rail transit equipment machinery/Rail transit equipment
Model:
22kg
Brand:
Hongyi
Retail Price
350.00USD
重量
kg
- Product Description
-
Description :
Manual switch manufacturer directly supplies coal mine manual switch for flexible use
1Manual switchProduct Introduction
According to different working modes, switchers are divided into manual horizontal switchers, manual spring switchers, and manual vertical switchers. According to work requirements, they are further divided into two types: manual switchers and electric switchers.
The switch uses the tension of the spring to switch the turnout to the fixed reverse position and maintain it in the fixed reverse position.
The switch is suitable for switches that are prone to "switch squeezing faults", and once the switch is squeezed, it will not damage the equipment.
The switch can lock the shaft into the locking hole on the base and add a lock head to lock the turnout in the reverse position, which is conducive to the safety of passing through the turnout.
IIManual switchparameter
Turnout conversion resistance: 95KN Surface treatment: Black paint Type: Railway equipment
Dimensions: 650 * 200 * 290mm Material: malleable ductile iron
Total length: 650mm Pull rod length: 450mm
IIIManual switchProduct Features
1. The handle length can be extended or retracted by 290mm. When the resistance to switch is not high, the handle length can be shortened, and vice versa, the handle length can be extended. To reduce the stroke of the handle, the handle can rotate 180 degrees, making it easy for manual operation.
2. The above expansion and rotation are achieved by lifting and adjusting the two spring pins on the handle sleeve before falling back in.
To overcome the resistance of pulling, the handle head is designed with a ball center slider structure, which is flexible in pulling.
4. The right angled turning center spindle is equipped with rolling bearings, which improve the service life and accuracy of the product.
5. There are bushings made of self-lubricating materials installed between the rotating shaft holes.
6. The connection between the pull rod and the turnout adopts a micro adjuster. After installation, the opening and sealing condition of the turnout can be adjusted without removing the connecting pin during use.
AfterSalesService :
Key words:- Manual switch
More Products
