Hongyi BQG200 Mining Pneumatic Diaphragm Pump with Small Floor Area, Model of Mining Pneumatic Diaphragm Pump

Description :

　　BQG200Mining Pneumatic Diaphragm Pump, Mining Pneumatic Diaphragm Pump, Pneumatic Diaphragm Pump Manufacturer

　　We, Hongyi, do itBQG200/0.4 Mining Pneumatic Diaphragm PumpWe will create, strive, and work hard with a better state, a more serious attitude, and full energy to achieve customer satisfactionBQG200/0.4 Mining Pneumatic Diaphragm PumpThe following content will introduce the mining pneumatic diaphragm pump. Please feel free to contact us at any time.

　　BQG200/0.4Mining pneumatic diaphragm pumpIntroduction:

　　BQG200/0.4Mining pneumatic diaphragm pumpIt is a new type of pump product that is powered by compressed air. Through the joint action of a ventilation valve, a reversing mechanism, and other components, the pump drives the diaphragm in the pump chamber to reciprocate, causing a pressure difference in the chamber and achieving the function of suction and discharge of the medium. It solves the structural defects of traditional diaphragm pumps (external air valve, easy to crash, and short service life of the air valve), built-in air valve, compact structure, long service life, easy maintenance, and far surpasses old-fashioned diaphragm pumps in performance. Mining pumps with coal safety standards are mainly used for drainage and sewage in high gas and outburst gas coal mines underground. They are also fire-resistant and explosion-proof, and are particularly suitable for use in high gas mines, petroleum, chemical and other departments. Besides,BQG200/0.4 Mining Pneumatic Diaphragm PumpIt also has all the functions of submersible pump, self-priming pump, impurity pump, and mud pump, with a wide range of applications.

　　BQG200/0.4Mining pneumatic diaphragm pumpPerformance characteristics:

　　1. It is reliable and cost-effective to use in flammable and explosive environments. It does not generate sparks after grounding and does not produce heat during operation. It can transport flammable and explosive liquids, powders, particles, etc.

　　2. The pump has a small volume, is easy to move, does not require a foundation, occupies a small area, and is easy and economical to install. Can be used as a mobile material conveying pump.

　　In the handling of hazardous and corrosive materials, diaphragm pumps can completely isolate the materials from the outside world.

　　4. Can be used for wastewater containing large particle impurities such as cement, mud, and sand slurry.

　　5. Save gas and be environmentally friendly, with easy and fast maintenance that does not delay the project schedule.

　　BQG200/0.4Mining pneumatic diaphragm pumpTypical applications:

　　1. Excavation, tunnels, drainage around mining equipment 2, discharge of coal slurry and mud from water tanks

　　BQG200/0.4Mining pneumatic diaphragm pumpadvantage

　　1. Due to the use of air as a power source, the flow rate automatically adjusts with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of a centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it needs to be matched with a reducer or frequency converter, which greatly increases the cost. The same applies to gear pumps.

　　2. The use of pneumatic pumps in flammable and explosive environments is reliable and cost-effective, such as the transportation of fuel and flammable and explosive fluids, because: after grounding, sparks cannot be generated; No heat is generated during work, and the machine will not overheat; Thirdly, the fluid will not overheat because the diaphragm pump has minimal agitation on the fluid.

　　3. In places with sufficient compressed air equipment, such as construction sites, power stations, industrial and mining wastewater discharge, due to the high impurities and complex composition in the sewage, the pipelines are prone to blockage, which can cause excessive load on the electric pump and make the motor vulnerable to heating. Pneumatic diaphragm pumps can pass particles and have adjustable flow rates, automatically stopping until unobstructed when the pipeline is blocked.

　　4. AdditionallyBQG200/0.4 Mining Pneumatic Diaphragm PumpSmall size, easy to move, no need for foundation, small footprint, easy and economical installation. Can be used as a mobile material conveying pump.

　　5. In the handling of hazardous and corrosive materials, diaphragm pumps can completely isolate the materials from the outside world

AfterSalesService :

• BQG200 Mining Pneumatic Diaphragm Pump