MS15/18/19/22 Anchor Cable Tensioning Machine with Simple Operation and Structural Composition for Mining Anchor Cable Tensioning Machine

Description :

　　MS15/18/19/22Anchor cable tensioning equipment, mining anchor cable tensioning equipment, pneumatic anchor cable tensioning equipment

　　MS15/18/19/22Anchor cable tensioning equipmentMotivate us to produce, success lies on the other side, achievementMS15/18/19/22 Anchor Cable Tensioning MachinePerformance, the following is an introductionMining anchor cable tensioning equipmentparameter

　　MS15/18/19/22Anchor cable tensioning equipmentstructural composition

　　MS15-250/63 anchor cable tensioning equipment dual speed reversing oil pump mainly consists of a quick plug seat, quick plug, pressure gauge, pump body, reversing handle, oil reservoir, foot pedal bracket, refueling hole cover, pressure rod handle, etc. There are inlet and outlet valves, sequence valves, unloading valves, etc. inside the pump body.

　　MS15/18/19/22Anchor cable tensioning equipmentThe hydraulic jack is mainly composed of a quick connector seat, quick connector, handle, oil cylinder, support seat, etc.

　　MS15/18/19/22Anchor cable tensioning equipmentThe high-pressure oil pipe assembly mainly consists of quick couplings, pressure fittings, high-pressure oil pipes, quick coupling seats, etc. The connection of the pipeline adopts quick couplings. This joint adopts steel ball locking radial sealing.

　　MS15/18/19/22Anchor cable tensioning equipmenttechnical performance

　　Dual speed reversing oil pump

　　Adapt to anchor cable diameter mm (15.24)

　　Rated pressure: 63MPa

　　Operating resistance: ＜ 50KN

　　Diameter of plunger: φ 25

　　Oil supply method: dual speed reversing

　　Rated oil storage: 1L

　　Unit weight: 7.5kg

　　High speed oil discharge: ≈ 8ml/time

　　Low speed oil discharge: ≈ 2ml/time

　　Anchor cable tensioning jack

　　Piston stroke: 52mm

　　Rated pressure: 63MPa

　　Piston area: 35cm2

　　Rated tensile strength: 250KN

　　MS15/18/19/22Anchor cable tensioning equipmentfeature

　　1. The tensioning jack is equipped with a built-in tool anchor, which not only achieves automatic anchoring and anchoring, but also ensures operational safety and improves work efficiency. In addition, it can be used in conjunction with various top pressure devices, and the length of the exposed steel wire does not exceed 20mm. 2. It is equipped with SYB-2S manual oil pump power source, which has good safety and is suitable for underground operations in various coal mines.

　　3. The overall structure is reasonable, the performance is superior, the operation is simple, and the use is safe.

AfterSalesService :

• Anchor cable tensioning equipment