FQW25-20/W Pneumatic Submersible Pump Mining Turbine Pump Hongyi FQW20-35/W Mining Pneumatic Submersible Pump

Description :

　　FQW35-20/WPneumatic submersible pump mining turbine pump Hongyi FQW20-35/W mining pneumatic submersible pump

　　FQW35-20/WPneumatic submersible pumpThe usage process is safe and the results are satisfactory. Grassroots mine workers shouldHongyi FQW20-35/W Mining Pneumatic Submersible PumpBecause it is efficient and safe. Senior staff should pay attention to the needs of grassroots employees.

　　FQW35-20/WPneumatic submersible pumpA submersible pump for sand and sewage discharge is designed with a fixed rotor eccentric and sliding blades as the power generation device, using the principle of different pressure bearing areas between adjacent blades and different pressures on both sides of the same blade to generate torque.

　　FQW35-20/WPneumatic submersible pumpThe appearance is novel, and it is a medium lift, medium flow mining pneumatic submersible pump. Due to the sliding friction between the blades and cylinder sleeves, as well as between the blades and guide grooves, the water pump is designed with a built-in oil mist device for continuous refueling during use, greatly improving its service life. The air motor has a large inlet diameter and large blade size. The water turbine adopts an open centrifugal vortex impeller, and the vortex chamber section also adopts a variable cross-section gradually opening and increasing optimized streamlined flow channel. It has the characteristics of long service life, high head, and high overall efficiency.

　　FQW35-20/WPneumatic submersible pumpSuitable for pumping and discharging wastewater from hazardous areas containing methane or coal dust, it can be widely used in underground coal mining operations to transport groundwater containing solid particles such as pollutants, coal powder, and sediment. The impeller adopts a special design, which has strong sewage discharge capacity and will not be blocked by solid particles or fibers, nor will it be prematurely damaged by the inhalation of particulate media. The overall structure is simple, and it is easy to move, disassemble, and maintain. It has the advantages of high efficiency, good performance, and low air consumption.

　　Hongyi FQW20-35/W Mining Pneumatic Submersible PumpA solid-liquid two-phase medium pumping equipment that uses compressed air as the power source, mine wastewater containing pollutants and solid particles as the transport object, and operates in a submersible manner (except for the exhaust pipe exposed to the water surface, some pump bodies including the inlet, pump seat, and pump cover need to be submerged in water). It can also transport clean water.

　　FQW35-20/WPneumatic submersible pumpModel and basic parameters:

　　1. Model FQW35-20/W

　　2. Rated flow rate of about 35 cubic meters

　　3. Rated head 20

　　4. Rated wind pressure 0.55MPa

　　5. Rated gas consumption of about 3 cubic meters

　　6. Noise 90dB

　　The major responsibility of my Hongyi Technology management lies in seekingFQW35-20/W Pneumatic Submersible PumpConsistency between user goals and enterprise goals.Hongyi FQW20-35/W Mining Pneumatic Submersible PumpEfficient, energy-saving, safe, and portable.

AfterSalesService :

• Pneumatic submersible pump