Hongyi MQT-130/2.8 pneumatic anchor drilling rig is easy to operate. MQT-130/2.7 pneumatic drilling rig is in stock
Category:
mechanical equipment/Fishery machinery and equipment/Mining drilling rig
Model:
MQT-130/2.8
Brand:
Hongyi
Retail Price
2,956.00USD
重量
kg
- Product Description
-
Description :
MQT-130/2.8Pneumatic anchor drilling rig, MQT-130/2.7 pneumatic drilling rig, anchor drilling rig model
Require quality,MQT-130/2.8 Pneumatic Anchor Drilling MachineHaving achieved this,MQT-130/2.8 Pneumatic Anchor Drilling MachineSatisfying customers is our hope.MQT-130/2.7 Pneumatic Drilling MachineAfter sales service satisfies you.
MQT-130/2.8Pneumatic anchor drilling rigScope of application:
MQT-130/2.7Pneumatic drilling rigWidely applicable to tunnels with rock hardness ≤ f10, MQT-130/2.8 pneumatic anchor bolt drilling rig is particularly suitable for anchor bolt support operations in coal tunnels. It can drill roof anchor bolt holes, anchor bolt holes, and also mix and install resin coated coil anchor bolts and anchors. No other equipment is required to achieve one-time installation and tightening of anchor rod nuts, meeting the requirements of initial anchor pre tightening force.
MQT-130/2.8Pneumatic anchor drilling rigProduct Features
Small size, light weight, easy operation, and convenient maintenance. Gear type pneumatic motor, stable operation, high reliability. The new fiberglass air leg design is safe, explosion-proof, and has a longer service life.
Gear type pneumatic motor has high torque, fast speed, stable operation, and strong reliability.
The patented gas retreat technology is safe, explosion-proof, and has good wear resistance; And the diameter was increased, increasing the driving force.
Equipped with dual exhaust channels, the drilling rig falls back quickly, accelerates the operation pace, and improves operation efficiency.
MQT-130/2.8Pneumatic anchor drilling rigparameters
Working pressure Mpa 0.4-0.63
Rated air pressure Mpa 0.5
Rated speed r-min 206
Flushing water pressure Mpa 0.6-1.2
Rated torque N.m 130
Stall torque N.m 220
Thrust KN 8
No load speed r-min ≥ 560
Gas consumption m3 min 4.5
MQT-130/2.8Pneumatic anchor drilling rigOperation Method:
1. Move the rotary knob with your right hand to connect the flushing water circuit.
2. The rotation of the drilling rig is controlled by a handle switch, and the more pressure is applied, the faster the rotation speed of the drilling rig; Release the switch to automatically stop rotating and reset to the closed position
3. Gradually rotate the control knob towards the "open" position with your left hand, and extend your air leg. When rotated to the "closed" position, the air leg retracts by descending under its own weight (note: when descending, the drilling rig descends quickly, and attention should be paid to standing firm, stabilizing the drilling rig, and preventing the drill rod from falling off).
AfterSalesService :
Key words:- Pneumatic anchor drilling rig
More Products
