Hongyi ZQS-50/2.6S Pneumatic Hand held Drilling Machine Usage Conditions ZQS Coal fired Drilling Machine Specifications for Coal Mines

Description :

　　ZQS50Pneumatic handheld drilling rig, ZQS coal-fired drill for coal mines, portable pneumatic drilling rig

　　valueZQS-50/2.6S pneumatic handheld drilling rigProduct quality, strengtheningZQS-50/2.6S pneumatic handheld drilling rigManagement, customer-centric,ZQS coal drill for coal minesWelcome to call for procurement. all-win harmony

　　ZQS-50/2.6SPneumatic hand-held drilling rigUsage conditions:

　　ZQS coal drill for coal minesCompressed air should be maintained at 0.4~0.63MPa and measured at a distance of about 5 meters from the inlet of the drilling rig. Compressed air should be clean and dry. If it contains excessive moisture, it will damage the oil film on the surface of the parts inside the pneumatic motor, deteriorate lubrication, and cause ice to form in the exhaust hole, blocking the exhaust channel and preventing the drilling rig from operating normally.

　　In order to eliminate excess moisture in the compressed air, an effective air-water separation device should be installed on the compressed air pipeline, and the accumulated water should be discharged before each drilling operation. An oil injector should also be installed on the compressed air pipeline to ensure lubrication.

　　ZQS-50/2.6SPneumatic hand-held drilling rigThe water quality for flushing should be clean, otherwise the waterway is prone to blockage, and the water pressure should be maintained at 0.6~1.2 MPa. If the water pressure is low, it will affect the timely discharge of rock debris from the borehole, resulting in the inability to achieve the desired drilling speed and fully utilize the efficiency of the drilling rig. After each drilling operation, the water valve should be closed first, and then the drilling rig should be idle for a while to facilitate water removal and rust prevention.

　　ZQS-50/2.6SPneumatic hand-held drilling rig(Pneumatic coal drill), a pneumatic tool powered by compressed air. thatZQS coal drill for coal minesIt has absorbed the advantages of other coal drills in its external structure and is used in mines with gas (methane) or coal dust hazards. It is a multi-purpose handheld rotary drilling rig. A handheld drilling rig used for drilling holes in coal and soft rock formations. It has the advantages of compact structure, light weight, and easy use and maintenance

　　ZQS-50/2.6SPneumatic hand-held drilling rigProduct Technical Parameters

　　Model ZQS-50/1.6 Applicable pressure range Mpa 0.4-0.63

　　Rated pressure Mpa 0.5 Rated torque N.m 50

　　No load speed r/min 1800 stall torque N.m 75

　　Rated speed r/min 300 8 High output power kW 1.6

　　8 high load torque N.m 60 flushing water pressure Mpa 0.6-1.2

　　Sound power level dB (A) ≤ 112 Machine weight kg 9

　　Gas consumption m3/min 2.4 ZQS coal drill for coal minesNoise pressure level dB (A) ≤ 95

　　ZQS-50/2.6SPneumatic hand-held drilling rigProduct Features:

　　The host motor can easily achieve forward and reverse rotation, smoothly push out the drill bit, solve the problem of stuck drilling during drilling, and avoid the loss and waste of drilling tools. This drilling rig is widely used for pre drilling and measuring the water and gas conditions in front of the roadway during excavation,

　　Mining rock drilling equipment:

　　1. T-23 rock drill, YT-24 rock drill, YT-25 rock drill, YT-27 rock drill, YT-28 rock drill, YT29 rock drill, YN27 internal combustion rock drill, 7655 rock drill, handheld rock drill, upward rock drill, hydraulic rock drill, etc.

　　ZM12 dry coal drill, ZM12 wet coal drill, ZM15 dry coal drill, ZM15 wet coal drill,

　　three ZQS coal drill for coal minesseries

AfterSalesService :

• Pneumatic hand-held drilling rig