Hongyi J1G400 Profile Cutting Machine Low Noise Factory Profile Cutting Machine High Safety

Description :

　　J1G400Profile cutting machine, factory profile cutting machine, J3G4 profile cutting machine

　　Quality is the life of an enterprise,J1G-400 profile cutting machineWe have achieved this, we have done itJ1G-400 profile cutting machineSurvive by quality and develop by quality. madeFactory profile cutting machineLow noise Advantages of high safety

　　J1G-400profile cutting machineMachine advantages:

　　1. Hidden saw blade Low noise High security

　　2. Foot operated switch, automatic material pressing, sawing

　　threeFactory profile cutting machineUse 12mm rubber blocks to press the material, which is not easily damaged

　　4. Single or multiple saws can be used together

　　A 5.800mm long feeding channel plate can improve sawing accuracy

　　6. Automatic fuel injection on both sides, the fuel quantity can be adjusted separately The cut surface has no burrs, and the saw blade is more durable

　　seven Factory profile cutting machineThis machine has undergone computerized machining with high sawing accuracy. Shipping and transportation costs are as follows:

　　J1G-400profile cutting machineInstructions for use

　　1. The operator must be familiar with the performance of the equipment, comply with safety operating procedures, and prevent accidents from occurring.

　　two Factory profile cutting machineWhen the cutting machine is working, it is necessary to be fully focused, not only to maintain a clear mind, but also to operate the electric tools rationally. It is strictly prohibited to operate the cutting machine after drinking alcohol.

　　3. The power supply circuit is safe and reliable, and unauthorized pulling is strictly prohibited. Before use, carefully check the performance of the equipment to ensure that all components are in good condition.

　　4. Wear appropriate work clothes, do not wear loose work clothes, and do not wear jewelry or long hair. It is strictly prohibited to wear gloves and operate without buttoning the cuffs.

　　five J1G-400profile cutting machineThe workpiece being processed should be firmly clamped, and it is strictly prohibited to start cutting when the workpiece is not clamped tightly.

　　6. It is strictly prohibited to grind burrs on the workpiece on the grinding wheel surface to prevent the grinding wheel from shattering.

　　seven J1G-400profile cutting machineDuring cutting, the operator should deviate from the front of the grinding wheel and wear protective goggles.

　　8. It is strictly prohibited to use damaged grinding wheels. When cutting, prevent sparks from splashing around and keep away from flammable and explosive materials.

　　9. When clamping the workpiece, it should be clamped steadily and firmly, the protective cover should be installed correctly, and after clamping, the machine should be turned on and checked for any shaking or abnormal noise.

　　tenFactory profile cutting machineWhen replacing a new cutting blade or grinding wheel midway, do not apply too much force to the locking nut to prevent the saw blade or grinding wheel from cracking and causing accidents.

　　eleven J1G-400profile cutting machineIf there is shaking or other malfunctions, the machine should be stopped immediately for repair. It is strictly prohibited to work while sick or under the influence of alcohol, and gloves should not be worn during operation. If dust is caused during operation, wear a mask or face shield.

　　twelve Factory profile cutting machineAfter processing, the power should be turned off and the 5S requirements for equipment and surrounding areas should be followed. The electric drill and insulation equipment should be placed together in the designated place.

AfterSalesService :

• J1G400 profile cutting machine