Hongyi YT46A hydraulic slider is easy to maintain, and the single hydraulic slider is convenient to use

Description :

　　YT46AHydraulic slider, single hydraulic slider, manual slider

　　We love work and produce wellYT4-6A hydraulic sliderNot concerned about personal gains and losses.YT4-6A hydraulic sliderContinuously surpassing quality,Single hydraulic sliderIt is a commonly used product with a large quantity and fast delivery. Welcome to inquire.

　　YT4-6AHydraulic sliderIntroduction and Characteristics:

　　YT4-6AHydraulic slider、 YT4-8A typeSingle hydraulic sliderIt is a manual sliding tool designed to meet the needs of coal mine blasting and general mining working faces. This is used in conjunction with several models of flexible scraper conveyors such as SGW40T and SGW80T, as well as other small scraper conveyors, to adapt to different forms of coal mining and meet the requirements of users to a greater extent. It can achieve significant results in reducing accidents, civilized production, and cost reduction. At the same time, this type of pusher can be used as a small hydraulic press, widely used for equipment maintenance, accident handling, and some occasions that require pushing and pushing.

　　Strong adaptability, good maneuverability, easy operation, high efficiency, easy maintenance, safe and reliable, can save a lot of investment compared to hydraulic jacks with centralized oil supply, and is economically cost-effective

　　YT4-6AHydraulic sliderModel meaning:

　　YT4-6A(8A)

　　Y refers to the structural feature code (hydraulic)

　　T represents product code (slider)

　　4 represents rated thrust of 4 tons (unit: ton)

　　6 represents the itinerary (number 100 x words)

　　A represents improvement

　　YT4-6AHydraulic sliderHydraulic principle:

　　YT4-6AHydraulic sliderIt is mainly composed of a double acting plunger pump, a combination valve, a directional valve, and a double acting oil cylinder.

　　1YT4-6A hydraulic sliderlaunch

　　When the power lever is pressed down, the pump plug of the plunger pump moves downward, creating negative pressure in the upper chamber of the pump. The oil in the mailbox is sucked into the upper chamber of the pump through the inlet pipe and the inlet valve of the combination valve. At the same time, the oil in the lower chamber is squeezed by the pump plug, and the oil outlet valve of the combination valve is opened to enter the rear chamber of the oil cylinder through the high-pressure chamber of the directional valve, pushing the piston and extending the piston rod group. The oil in the front chamber of the oil cylinder is squeezed out by the piston, flows through the oil filling pipe, and the low-pressure chamber of the directional valve is discharged back to the mailbox. When the power lever is lifted, the lower chamber of the pump plug absorbs oil, and the pressure oil in the upper chamber enters the rear chamber of the oil cylinder through the combination valve and directional valve, continuing to push the piston and piston rod group to extend. When the piston rod extends to a stroke of 600mm (800mm), the Y-shaped rubber ring on the piston passes over the damping hole located at the front of the oil cylinder. The pressure oil in the rear chamber of the oil cylinder is connected to the return oil circuit in the front chamber of the oil cylinder through the damping hole, and the oil is discharged back to the mailbox through the return oil pipe, achieving stroke unloading and stopping the movement of the piston, providing safety protection. At this point, there will be a feeling of lightness when manipulating the pressure handle, and the handle will become heavier after unloading the empty test.

　　2YT4-6A hydraulic sliderRecycling: Rotate the directional valve 90 degrees

　　The oil pumped out by the plunger pump enters the front chamber of the cylinder through the reversing valve and the return pipe, while a small amount of oil enters the rear chamber of the cylinder through the damping hole. However, these oils are directed directly to the oil tank through the directional valve and do not generate pressure. Additionally, due to the damping effect of the holes, the pressure in the front chamber of the cylinder increases and the piston begins to recover. When the Y-shaped rubber ring on the piston returns and crosses over the damping hole, the oil circuit to the damping hole is cut off, and the piston rod assembly recovers normally. The oil in the rear chamber of the cylinder flows back to the oil tank.

AfterSalesService :

• YT46A hydraulic slider