Hongyi brand 400 diameter profile cutting machine 2.2kwJ3G400 profile cutting machine

Description :

　　four hundredDiameter profile cutting machine, J3G400 profile cutting machine, factory profile cutting machine

　　The market is the direction of the enterprise, we dofour hundredDiameter profile cutting machinePrioritize product quality over price, only with quality can there be a market, and improvefour hundredDiameter profile cutting machineThis product has made progress.J3G-400profile cutting machineBelow is a detailed introduction, welcome to learn more.

　　four hundredDiameter profile cutting machineIt consists of a series excited motor, transmission mechanism, shield frame, base, and rotatable clamp.

　　Single phase AC motors are divided into single insulation profile cutting machines and double insulation cutting machines based on the presence or absence of additional insulation between the stator, rotor, and ground.

　　The angle between the clamping jaws of the workpiece and the grinding wheel shaft can be adjusted freely from 0 to 45 degrees on the left and right, and some products can be adjusted freely from 0 to 30 degrees on the right position.

　　The parallel grinding wheel used in the profile cutting machine is a fiber-reinforced resin thin film grinding wheel with a diameter not exceeding 406mm and a rated linear speed not exceeding 80m/s

　　four hundredDiameter profile cutting machine parameters:

　　Model: J3G-400

　　Grinding wheel: Φ 400 × Φ 32 × 3.2

　　Cutting range: Φ 50

　　Clamp adjustment angle: 0-45 degrees

　　Grinding wheel linear speed: 60m/s

　　Idle speed: 2280R/min

　　Power: 2.2KW

　　Voltage: 220V

　　four hundredThe power of the diameter profile cutting machine is suitable for cutting steel:

　　400 type 2.2KW (suitable for cutting hollow steel or for short use time)

　　3KW (suitable for slightly thicker steel or longer usage time)

　　4KW (suitable for solid steel or long-term use)

　　Voltage 380V (suitable for factories, construction sites, etc.)

　　Single phase (suitable for household use or factories, construction sites, etc. without three-phase power supply) voltage 220V

　　Single phase 3KW requires customization and usually takes two to three days to ship.

　　four hundredRequirements for diameter profile cutting machine:

　　four hundredDiameter profile cutting machineOperator dress code requirements

　　Wear appropriate work clothes, do not wear jewelry, tie ties, etc.

　　Use composite safety standard face shields and goggles.

　　J3G-400profile cutting machineWork environment requirements

　　Use the machine in a humid environment and keep the work area well lit.

　　Do not use tools in flammable or explosive areas.

　　Keep the work area clean. Do not let children enter the workspace.

　　four hundredDiameter profile cutting machinethe maintenance of the tools

　　Regularly maintain the machine and do not litter tools.

　　Do not pull the tool to unplug the cable plug from the socket.

　　Timely remove machine dust, debris, etc.

　　Tools should be repaired by personnel

AfterSalesService :

• 400 diameter profile cutting machine