YT4-6A manual slider, hydraulic slider, mining YT4-8A manual slider, slider

Description :

　　YT4-6AManual sliding device, hydraulic sliding device, mining YT4-8A manual sliding device, sliding device

　　YT4-6AManual slider YT4-8A manual slider hydraulic slider manual hydraulic slider

　　Take care of itYT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceProduct quality must start from me, Shandong HongyiYT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceEstablishing a business with precision, winning with quality, emphasizing practical results, increasing efficiency, improving quality, and perfecting management.

　　1YT4-6A manual slider, YT4-8A manual slider, slider productAdvantages:

　　1) Safe. Due to the fact that the YT4-8A hydraulic pusher is fixed on the conveyor and the oil cylinder is buried on the side of the old pond, the force points are the old pond gangue and the support pillars on both sides of the pusher. The entire pusher will not slide and move, achieving the purpose of safe pushing.

　　2) Fast moving speed. Due to the fact that the YT4-8A hydraulic slider is controlled by valve plates and does not require back and forth movement, it has been calculated that using other methods to move the conveyor takes 40 minutes, while using a fast hydraulic slider only takes 5 minutes to complete. Due to the advantages of safety and fast speed of the YT4-8A hydraulic pusher, the surplus time of the pusher can be used for coal mining and other processes, resulting in a corresponding increase in mining yield and efficiency, and has wide promotion and application value.

　　IIYT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceInstallation arrangement: In order to evenly push the conveyor, based on on-site experience, a fast hydraulic slider is installed at the head and tail of the machine, and at every 10m in other sections. When installing the YT4-8A hydraulic slider, first move the slider to the coal wall side, and the second step is to fix the slider connecting clip in place? SGW－40T-40? On the old pond side groove of the DSJ-650-30 conveyor, the third step is to connect the pusher with the connecting card using a pin and perpendicular to the conveyor. The YT4-8A hydraulic pusher is located between two individual hydraulic supports.

　　3、 YT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceParameter introduction:

　　Specification and model YT4-6A YT4-8A

　　Travel mm 600 800

　　Dimensions mm 855 * 135 * 210 1055 * 135 * 210

　　Whole machine weight kg 3.3 3.8

　　Rated thrust KN 39.2 39.2

　　Handle lifting mm 7 7

　　Handle pressed down mm 10 10

　　Power multiplier 90 90

　　Rated recycling tension KN 9.3 9.3

　　Pushing speed mm 17 17

　　4YT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceMain purpose and scope of application: The mining hydraulic slider is a hydraulic mechanism with dual action of internal fluid. It can realize the movement of SGW-150C and SGWD-180P scraper conveyors in underground blasting mining faces or general machine mining faces in coal mines. If the base and other parts are replaced, it can also be used for the movement of the coal scraper. In addition, the YT4-8A hydraulic pusher can complete the recovery of pillars in the coal mining face. Suitable for coal mining faces supported by external injection type single hydraulic supports in medium thick coal seams.

　　5YT4-6A Manual Sliding Device YT4-8A Manual Sliding DeviceOperation: Before moving the mining face conveyor, first clean the floating coal in front of the conveyor to reduce the pushing resistance. Secondly, adjust the handle on the force plate to clamp the arc-shaped force point on the support legs on both sides of the YT4-8A hydraulic pusher. Thirdly, operate the hydraulic valve handle to supply liquid to the rear chamber of the pusher oil cylinder, so that the oil cylinder extends and pushes the conveyor forward. Fourthly, when the conveyor is fully pushed in place, reverse the operation of the hydraulic valve to supply liquid to the front chamber of the YT4-8A hydraulic pusher oil cylinder. The oil cylinder shaft retracts into the oil cylinder, driving the oil cylinder to move forward to its original position.

AfterSalesService :

• Manual sliding device