J3G4 profile cutting machine diamond saw blade profile cutting machine diameter 400mm

Description :

　　J3G4Profile cutting machine, profile cutting machine, factory profile cutting machine

　　Made through the sincere efforts of all employeesJ3G profile cutting machineWe doJ3G4 profile cutting machineCollaborative progress, pioneering spirit, and making good decisions according to your requirementsprofile cutting machine.

　　J3G4profile cutting machineUsage structure

　　J3G4profile cutting machineAlso known as grinding wheel saw, profile cutting machine is suitable for departments such as construction, hardware, petrochemicals, mechanical metallurgy, and water and electricity installation. A profile cutting machine is a commonly used equipment that can cut materials such as metal square flat pipes, square flat steel, I-beams, groove steel, carbon element steel, and element pipes. Cutting machine, also known as grinding wheel saw, profile cutting machine is suitable for departments such as construction, hardware, petrochemicals, mechanical metallurgy, and water and electricity installation.

　　J3G4profile cutting machineStructural features:

　　J3G4profile cutting machineIt consists of a series excited motor, transmission mechanism, shield frame, base, and rotatable clamp.

　　Single phase AC motors are divided into single insulation profile cutting machines and double insulation cutting machines based on the presence or absence of additional insulation between the stator, rotor, and ground.

　　The angle between the clamping jaws of the workpiece and the grinding wheel shaft can be adjusted freely from 0 to 45 degrees on the left and right, and some products can be adjusted freely from 0 to 30 degrees on the right position.

　　The parallel grinding wheel used in the profile cutting machine is a fiber-reinforced resin thin film grinding wheel with a diameter not exceeding 406mm and a rated linear speed not exceeding 80m/s

　　J3G4profile cutting machineTechnical parameters of material cutting machine (three-phase 3KW):

　　Rated power: 3KW

　　Rated speed: 2800r/min

　　Rated voltage: 380V

　　Rated frequency: 50Hz

　　Grinding wheel specification: 400 * 32 * 3.2mm

　　Cutting angle: ± 45 °

　　Cutting ability: Round steel with a diameter of 50mm

　　Steel pipe Φ 135 * 6mm

　　Angle steel 100 * 10mm

　　Channel steel: 126 * 53mm

　　J3G4profile cutting machineFeatures: This is a highly versatile cutting machine with a high market usage rate. Compared with models with the same configuration on the market, the fitting accuracy of mechanical parts has been improved. Abandoned some unreasonable designs. And optimized and reinforced the casting structure. Increased motor overload power and starting torque to ensure complex operating conditions. The power switch adopts a silver point waterproof three-phase switch. This cutting machine has the characteristics of strong universality, easy mobile operation, simple and practical functions, and high cost-effectiveness. Proficient in cutting solid round steel with a diameter of less than 50 millimeters or profiles with a wall thickness of less than 15 millimeters, capable of cutting solid round steel with a diameter of 80 millimeters. Widely applicable and economically practical.

AfterSalesService :

• J3G4 profile cutting machine