Convenient J3G profile cutting machine, grinding wheel cutting machine, single person operation

Description :

　　J3G400Profile cutting machine, grinding wheel cutting machine, profile cutting machine

　　We, Hongyi, do itJ3G-400profile cutting machineWe will create, strive, and work hard with a better state, a more serious attitude, and full energy to achieve customer satisfactionJ3G-400profile cutting machine，Grinding wheel cutting machineThe following content will be introduced, please feel free to contact us at any time.

　　J3G-400profile cutting machineScope of Application

　　Grinding wheel cutting machineSuitable for sawing various shaped metals such as aluminum, aluminum alloys, copper, copper alloys, non-metallic plastics, and carbon fibers, especially suitable for sawing aluminum doors and windows, photo frames, plastic steel, electric wood panels, aluminum extrusions, paper tubes, and profiles; Handheld pressure saw material, material is not easily deformed and has low loss; Accurate sawing angle; Low vibration and noise; Easy to operate, high efficiency, capable of sawing single or multiple pieces together. It can be made as a 90 ° straight cut, a 90 ° -45 ° left or right oblique cut, and so on. The grinding wheel cutting machine can cut materials such as metal square flat pipes, square flat steel, I-beams, groove steel, carbon steel, and elemental pipes.

　　Hongyi brandJ3G-400profile cutting machineTechnical Specifications:

　　Model of grinding wheel saw: grinding wheel diameter 355, 400, 500

　　The motor is divided into 2.2KW, 3KW, and 4KW

　　Brand: Hongyi

　　Model: J3G-400

　　Power supply voltage: 220/380V

　　Blade diameter: 400 (mm) * 32 * 3.2

　　Grinding wheel cutting machineIdle speed: 2800r/min

　　Sawing depth: 135 (mm)

　　Clamp adjustment range: 0- ± 45 °

　　Idle speed: 2280 (r/min)

　　Power: 3000 (W)

　　Weight: 60/65 (Kg)

　　 J3G-400profile cutting machinestructural characteristics

　　one Grinding wheel cutting machineIt consists of a series excited motor, transmission mechanism, shield frame, base, and rotatable clamp.

　　2. Single phase AC motors are divided into single insulation profile cutting machines and double insulation cutting machines based on whether there is additional insulation between the stator, rotor, and ground.

　　three J3G-400profile cutting machineThe angle between the clamping jaws of the workpiece and the grinding wheel shaft can be adjusted freely from 0 to 45 degrees on the left and right, and some products can be adjusted freely from 0 to 30 degrees on the right position.

　　4. The parallel grinding wheel used in the profile cutting machine is a fiber-reinforced resin thin film grinding wheel with a diameter not exceeding 406mm and a rated linear speed not exceeding 80m/s.

AfterSalesService :

• J3G profile cutting machine