Hongyi single hydraulic pillar anti fall device, single pillar anti slip device with adjustable length

Description :

　　Single hydraulic pillar anti fall device, single pillar anti slip device, simple anti fall device

　　We, Hongyi, do itSingle hydraulic prop anti collapse deviceWe will create, strive, and work hard with a better state, a more serious attitude, and full energy to achieve customer satisfactionSingle hydraulic prop anti collapse deviceThe following content will be introduced about the anti slip device of the single pillar. Please feel free to contact us at any time.

　　Single hydraulic prop anti collapse deviceIntroduction:

　　Single hydraulic prop anti collapse deviceUsed to support the top beam of the bracket and ensure the requirement of lifting individual pillars. It is necessary to replace the damaged single pillar anti collapse device in a timely manner. It is recommended to strictly distinguish the three types of pin shafts and use connecting pin shafts for the maintenance of the hydraulic pillar anti collapse chain. When using a single pillar anti fall device, pay attention to the levelness of the chain breaker, so as not to easily tilt the top pin. Chain oil is a type of industrial lubricating oil,

　　Single hydraulic prop anti collapse deviceUsed for lubrication and rust prevention of hydraulic support chains, reducing friction and wear, improving transmission efficiency and extending chain life. A single pillar anti collapse device for underground mining face in a coal mine. It includes a clip, a metal chain, and a hook, with one end of the metal chain hinged with a clip and the other end hinged with a hook.

　　Single hydraulic prop anti collapse deviceInstallation requirements:

　　1. Support each individual hydraulic prop according to the support standards.

　　2. When installing column clamps, keep the clamps between columns on the same horizontal line.

　　3. Ensure that the clamp is securely fastened to the column before installing the front and back buckle nuts. When adjusting the front and back buckle nuts, observe the tightness and length of the connection to ensure that it can be tightened and straightened.

　　4. Before and after each shift, check whether the anti fall device of each pair of individual hydraulic supports is missing or damaged Check for looseness and promptly address any issues to ensure safe support effectiveness.

　　Single hydraulic prop anti collapse deviceIt is an anti overturning and anti slip device for cutting top pillars used in underground coal mining working faces. The device includes two steel connecting rods. The upper and lower ends of the cutting top pillar cylinder body are each fixed with a steel buckle. One end of the steel connecting rod is connected to the steel buckle through a pin shaft, and the other end of the steel connecting rod is fixed to a row of single pillars adjacent to the cutting top pillar through a pin shaft connection. It can enable the top cutting pillar to be used independently on high angle working surfaces, with unlimited movement steps and convenient operation, improving work efficiency. Reduced requirements for usage environmental conditions. Reusable, anti fall, anti slip, safe and reliable.

　　Single hydraulic prop anti collapse deviceNotes:

　　It is necessary to replace the damaged single hydraulic pillar anti collapse device in a timely manner. It is recommended to strictly distinguish the three types of pin shafts and use connecting pin shafts for the maintenance of the hydraulic pillar anti collapse chain.Single hydraulic prop anti collapse deviceWhen using a chainring, pay attention to being level and straight, so as not to easily tilt the top pin. Chain oil is a type of industrial lubricating oil. The single pillar anti overturning device is used for hydraulic pillar anti overturning chain lubrication, rust prevention, reducing friction and wear, improving transmission efficiency, and extending chain life. A single pillar anti collapse device for underground mining face in a coal mine. It includes a clip, a metal chain, and a hook, with one end of the metal chain hinged with a clip and the other end hinged with a hook. When in use, wrap the hook of the single pillar anti fall device around the single pillar and hang it on the metal chain, that is, tie the single pillar with the metal chain and clip it on the top beam. The anti collapse device of a single pillar consists of two top cutting pillars that are moved together. There are upper and lower connecting rods installed on the upper and lower parts of the two top cutting pillars. The two ends of the upper and lower connecting rods are hinged to the two top cutting pillars, connecting the π - shaped beam and the single pillar to fix the single pillar. This effectively avoids accidents caused by the pillar collapsing due to pressure relief, greatly improves the construction safety of miners, and is an essential mining equipment.

AfterSalesService :

• Single hydraulic prop anti collapse device