Mining Mali loose sealing material foam grouting Mali loose sealing material barrel two-component

Description :

　　MaryLoose sealing material Ma Li loose sealing material barrel two-component foam grouting

　　Seriously do itMa Li loose sealing hole materialPursuing user satisfaction, because there is no product in the world that can survive for a long time with poor quality and low price alone,Mali loose sealing material barrel two-component foam groutingQuick, simple, and efficient sealing of gas and water injection holes. Shanhongyi Technology is constantly learning and surpassing. Your satisfaction is our pursuit, and we take sealing materials very seriously. Malisan sealing material is a type of organic polymer two-component foaming/sealing grouting material, which has the characteristics of adjustable foaming time, high foaming ratio, solvent-free, low odor, flame retardant, etc.

　　1Ma Li loose sealing hole materialTechnical advantages: First, the viscosity is low, which can well penetrate into small fractures. Although its viscosity is low, it can form a strong adhesive force with the formation, and has good flexibility, which can withstand the subsequent formation movement. The reaction speed is very fast, and it can react within ten seconds after encountering water, so as to quickly seal the water flow. The foam formed after reaction will not be soluble in water, and its compression performance is very good. The expansion rate is very high, the construction amount is small, and it saves money and labor.

　　IIMa Li loose sealing hole materialProduct Features:

　　The foaming speed and multiple of this product are adjustable.

　　2. Solvent free, high flash point, good flame retardancy, and no harmful gases produced during construction, especially suitable for construction in enclosed tunnels.

　　3. It has good adhesion to the construction base surface of rock layers, concrete, etc.

　　IIIMali loose sealing material barrel two-component foam groutingUsage:

　　1. No mining is required on siteSealing materialTo prepare the slurry, simply connect components A and B into the grouting pump system, adjust the volume ratio to feed in a 1:1 ratio, and mix automatically through a static mixer to achieve grouting.

　　2. Before grouting, it is advisable to use the mineSealing materialPlace the two components at the corresponding ambient temperature for more than 12 hours. The on-site material temperature, environmental moisture, mixing conditions, etc. have a certain impact on the solidification time, rate, and strength of the slurry.

　　4Ma Li loose sealing hole materialSuitable for sealing gas drainage holes, sealing air leaks, etc. The slurry is packaged separately in two components, and there is no need to weigh and mix the slurry on site. As long as component A and component B are automatically mixed in a 1:1 (volume ratio) through a dual liquid pump, grouting can be carried out.

　　We are passionate aboutMa Li loose sealing hole materialBe familiar with the output of finished products, sense of responsibility, and effective market promotion,Mali loose sealing material barrel two-component foam groutingCan enable the product to leverage its own advantages, with minimal usage for underground operations, saving money and effort. In addition, our company produces mining chemical grouting materials including: mining reinforcement materials, mining water blocking materials, mining filling materials, mining sealing materials, mining sealing materials, mining spraying materials, gas sealing bags, rapid sealing tanks, etc. Your satisfaction is the driving force behind our development. Welcome to inquire by phone.

AfterSalesService :

• Ma Li loose sealing hole material