Hongyi ZQS-50/1.6 pneumatic handheld drilling rig ZQS-50/1.6S wind coal drill in stock

Description :

　　ZQS50Pneumatic handheld drilling rig, ZQS wind coal drill, mining handheld pneumatic drilling rig

　　enhanceZQS-50/1.6 pneumatic handheld drilling rigQuality, seize the opportunity, and persevere to ensureZQS-50/1.6 pneumatic handheld drilling rigProduction is the key to achieving efficiency. You need to purchase carefully, HongyiZQS-50/1.6S wind coal drill

　　ZQS-50/1.6Pneumatic hand-held drilling rigProduct Introduction;

　　ZQS-50/1.6SWind coal drillMainly used for drilling coal seams and soft rocks in mines, buildings, tunnels, etc. Nowadays, coal drills have gradually replaced coal drills in mines. The matching drill pipes are coal drill pipes and Fried Dough Twists drill pipes, which can be used with air legs. Lightweight and more convenient to use than coal drills.ZQS-50/1.6S wind coal drillIn coal mines and construction projects, handheld and gas leg dual-purpose rotary pneumatic coal drills are used for drilling coal seams, soft sandstones, shale, etc. Both wet and dry drilling can be used. The drilling range is 35-45mm.

　　ZQS-50/1.6Pneumatic hand-held drilling rigProduct Technical Parameters

　　Model ZQS-50/1.6 Applicable pressure range Mpa 0.4-0.63

　　No load speed r/min 1800 stall torque N.m 75

　　Rated pressure Mpa 0.5 Rated torque N.m 50

　　Gas consumption m3/min 2.4 Noise pressure level dB (A) ≤ 95

　　Rated speed r/min 3008, high output power kW 1.6

　　Sound power level dB (A) ≤ 112 Machine weight kg 9

　　8 high load torque N.m 60 flushing water pressure Mpa 0.6-1.2

　　ZQS-50/1.6Pneumatic hand-held drilling rigWorking Principle:

　　ZQS-50/1.6SWind coal drillThe power source is compressed air, which consists of a rotator, an air handle, and a sailor handle. It is composed of a pair of large gears to form a gear motor and a pair of small gears to form a reducer. The two handles control the air source, water source, and drill chuck to clamp the drill rod.

　　After connecting the wind source and water source with two handles respectively. After pressing the wrench of the pneumatic handle, high-pressure air enters the motor through the handle, driving the motor to rotate at high speed. Then, it is reduced by the reducer to drive the spindle to rotate, thereby driving the drilling tool to rotate and achieve drilling work. During the drilling process, unscrewing the sailor handle and flushing water will enter the spindle through the handle and reach the drill bit for flushing and cooling. After drilling is completed, release the pneumatic handle button, the high-pressure air is cut off, and the drilling rig stops rotating.

　　ZQS-50/1.6Pneumatic hand-held drilling rigFeatures:

　　1. Safe arm distance, easily overcoming the reverse torque when stuck in the drill.

　　2. Provide the best performance of current handheld pneumatic devices, with a power output of 2.5kW and an efficiency improvement of 60% compared to existing models.

　　3ZQS-50/1.6S wind coal drillNew layout mode, grip structure, easy to use.

　　4. A variety of drill rods with complete supporting models are available for users to choose from, allowing the drilling rig to complete various drilling operations in coal seams, especially suitable for water and gas exploration holes, drainage holes, etc.

　　5. Special materials and manufacturing processes ensure an average trouble free working time of over 6 months.

　　6. The brand new noise reduction structure allows you to work in a safe and suitable environment.

AfterSalesService :

• Pneumatic hand-held drilling rig